Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Interior/Exterior/Visual (http://www.jeepgarage.org/f182/)
-   -   Front Chrome Bumper Molding (http://www.jeepgarage.org/f182/front-chrome-bumper-molding-20622.html)

OnedoubleL 03-22-2011 04:09 PM

Front Chrome Bumper Molding
 
Is the chrome molding on the lower front bumber available for the 2005 WK? Is it for the Limited only?

DAVY27 03-22-2011 05:32 PM

Re: Front Chrome Bumper Molding
 
you can get it here : http://www.justforjeeps.com/05wkgrchchbu.html

you will probably need to take off the bumper cover and drill slots for the insert

OnedoubleL 03-22-2011 08:36 PM

Re: Front Chrome Bumper Molding
 
Thanks. I picked one up from somewhere else and the package said for the Limited and it doesn't seem to fit. I think I will check this one out.

SvenskaJeepGuy 03-22-2011 08:51 PM

Re: Front Chrome Bumper Molding
 
it will fit if it is 05-07 they are the same. if it is 08+ i will buy it from you lol

OnedoubleL 03-23-2011 02:51 PM

Re: Front Chrome Bumper Molding
 
The package says its for the 2005 Jeep Grand Cherokee and their Customer Service says its supposed to fit all GC's for that year. But, the raised areas on the lower portion of the bumper are wider than the ones on the molding. Any ideas?

SvenskaJeepGuy 03-24-2011 11:19 AM

Re: Front Chrome Bumper Molding
 
post a pic with the chrome pieces near the area where it belongs

stashgto 01-17-2013 08:51 PM

Re: Front Chrome Bumper Molding
 
I'm having this problem right now with Part #1044101 from rock auto it's about two inches too short.

DAVY27 01-17-2013 11:48 PM

Re: Front Chrome Bumper Molding
 
^ is that the overland chrome trim FOR the 08+ WKs?

2008 Overland Grand Cherokee Front Bumper Insert

You may have purchased the one for the 05-07 WKs

stashgto 01-18-2013 12:42 AM

Re: Front Chrome Bumper Molding
 
1 Attachment(s)
It's listed for the up to 09, and yeah it's definitely the wrong year. This totally sucks I was so looking forward to putting my front lower bumper, and sides back on tomorrow.
I need to join so I can thank you properly but thanks for your bumper pic's after I saw them I was able to find that stupid bolt.
Here's the finished rear end sorry about the branch.

DAVY27 01-18-2013 06:10 PM

Re: Front Chrome Bumper Molding
 
:thumbsup: glad my pics helped! yea that bolt was such a PITA to find. Looks sooo much better with the limited bumper!

hopefully you can return that front piece

stashgto 01-19-2013 11:11 PM

Re: Front Chrome Bumper Molding
 
3 Attachment(s)
Thanks Davy, I reluctantly put the front back together without the molding, Fog lights, or the mesh I have(GRRRRRR). Since I have to take it back apart when I find the correct one, and it will give me an opportunity to find some chrome tow hooks. Thankfully Rock Auto has stood behind the purchase, and will put the monies back on my pay pal with no problem at all.
I used Dupli-color perfect match which doesn't match perfectly. When I re-spray it I'll use the online company Omelet referred me to. I do like the way it looks , but I'm just a little bummed. I really hate doing the same thing twice.
The pic on the left is right now, the middle is with the new grille, and side moldings, the right is original sorry so close it's the only one I have.

DAVY27 01-19-2013 11:39 PM

Re: Front Chrome Bumper Molding
 
o yea, that looks soo much better! excellent paint job on the lower bumper


All times are GMT -5. The time now is 03:19 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community