Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Off Road Modifications (http://www.jeepgarage.org/f42/)
-   -   NEED HELP WITH UPCOMING PROJECT WJ LIFT 6"long arm lift....CAN I INSTALL 2"puck lift (http://www.jeepgarage.org/f42/need-help-with-upcoming-project-wj-lift-6-long-arm-lift-can-i-install-2-puck-lift-22790.html)

slim 05-05-2011 03:30 AM

NEED HELP WITH UPCOMING PROJECT WJ LIFT 6"long arm lift....CAN I INSTALL 2"puck lift
 
2004 Grand Cherokee Limited WJ

I need help can i install 2" puck lift with my clayton 6 inch long arm lift im getting custom drive shafts and all ....adjustable track bar only stretch 6" though will have to have that modified and im guessing the quick disconnects also probally have to be modified. Can Any one help me ???? email me
markmacak@ymail.com

all the add ons
-6" clayton long arm lift (with blisten shocks)
-2" coils if theyll work okay
-dual front stabilizers(rough country)
-converting from AWD>selectrac(np 242 HD)
-Tom Wood rear output conversion kit for transfer case
-Custom Tom Wood rear driveshaft
-15x10 Mickey Tohmpson Classic Lock II Rims
-35x12.50 Dunlop tires(i believe all terrain)

mhassler 06-14-2011 07:42 AM

Re: NEED HELP WITH UPCOMING PROJECT WJ LIFT 6"long arm lift....CAN I INSTALL 2"puck l
 
How did this turn out?

Did you get the help you need? I just saw this so if you still need help I may be able to offer some, let me know.

JeepMe 06-14-2011 01:20 PM

Re: NEED HELP WITH UPCOMING PROJECT WJ LIFT 6"long arm lift....CAN I INSTALL 2"puck l
 
Are you running 35s on a stock D35?

206WJ 06-15-2011 05:27 PM

Re: NEED HELP WITH UPCOMING PROJECT WJ LIFT 6"long arm lift....CAN I INSTALL 2"puck l
 
Quote:

Originally Posted by JeepMe (Post 430657)
Are you running 35s on a stock D35?


Limited should be a D30.


But as for the origional question... As long as you have the correct length shocks you should be fine with another 2"

mhassler 06-17-2011 08:08 AM

Re: NEED HELP WITH UPCOMING PROJECT WJ LIFT 6"long arm lift....CAN I INSTALL 2"puck l
 
You mention 6" LA kit and 2" Coils. Do you mean 6" Coils that come with the LA kit and 2" Spacers?

If so, with 8" & 35s on a WJ you may need to look at: Drop Pitman Arm and a new Steering Box. Also, I designed and made my own quick-disconnects fro my ZJ when I lifted it 9", its very easy, the hard part is finding a shop to make them.

Not sure if there is an over-the-knuckle steering setup for a a WJ, I installed one on my ZJ when I went from 5.5" to 9", but that was a great benefit as well.

And, if possible, I'd recommend 8" springs over 6" springs and 2" spacers. I know Rubicon Express makes 8" coils but I also know they closed - not sure if they have or will re-open.

My '98 ZJ was a Special Edition with Tow Package and Dana 44s. Is there a possibility of that on the 04 WJs?

Just remember, in some states a LA kit will not pass inspection as the stock CA locations must be removed. So, you may have trouble selling it later - if you decide to. I used Rusty's Off-Road Bolt on adjustable LA system when it finally came out. It was just the LA, not a kit. BEfore that I had Rubicon express fab custom Control arms. It was a bit ridiculous as the angle was so steep.

Sorry for my half-assed response, but I am not familiar with the WJ setup. My experience is on ZJs and I am currently learning on my Wk2.


All times are GMT -5. The time now is 04:10 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community