Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Troubleshooting/Problems Discussion (
-   -   codes on my 06 wangler (

George 05-13-2011 07:08 PM

codes on my 06 wangler
i keep getting codes P0133 and p0153. replaced O2 sensors and replaced broken exhuast manifold.

magnumman426 05-17-2011 08:33 PM

Re: codes on my 06 wangler
Check for a leaking cat convertor. Also, check the wiring harness as it passes at the back of the valve cover. There is a large bolt at the rear LEFT side, that has a tendancey to rub through the convoluted tubing and chaffes the wiring inside.
Hope this helps

All times are GMT -5. The time now is 03:11 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community