Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Performance Modifications (http://www.jeepgarage.org/f6/)
-   -   Throttle Body: Should or Shouldn't I??? (http://www.jeepgarage.org/f6/throttle-body-should-or-shouldnt-i-24282.html)

SoCalMoparWK 06-11-2011 02:42 AM

Throttle Body: Should or Shouldn't I???
 
Thinking about getting a 70mm throttle-body since I just changed my AFE to a K&N intake. So for now should I buy one while I wait to get my swamp or not?? What do u think??

05WK 06-11-2011 09:11 AM

Re: Throttle Body: Should or Shouldn't I???
 
Call Dan "Fastman" great quality and offers core charge. I LOVE mine!

Www.thefastman.com

Chaoul1 06-11-2011 12:16 PM

Re: Throttle Body: Should or Shouldn't I???
 
Why not if your looking for more power?

Scottina06 06-11-2011 12:38 PM

Re: Throttle Body: Should or Shouldn't I???
 
I would stay around the 68mm unless you have the mods to badck it up...ie. cams, race ported heads etc. Dan will tell you the same thing....

SoCalMoparWK 06-11-2011 04:39 PM

Re: Throttle Body: Should or Shouldn't I???
 
What the stock TB size??? on Airrams site say that if you have intake, superchip tune, and exhaust then a 70mm is good anything bigger you must have more mods done...is this true??? got the cams just haven't installed them yet...

Quote:

Originally Posted by Scottina06 (Post 429039)
I would stay around the 68mm unless you have the mods to badck it up...ie. cams, race ported heads etc. Dan will tell you the same thing....


05WK 06-12-2011 01:14 AM

Re: Throttle Body: Should or Shouldn't I???
 
Quote:

Originally Posted by Scottina06 (Post 429039)
I would stay around the 68mm unless you have the mods to badck it up...ie. cams, race ported heads etc. Dan will tell you the same thing....

x2

Www.thefastman.com tells you everything

SoCalMoparWK 06-12-2011 03:54 AM

Re: Throttle Body: Should or Shouldn't I???
 
fasho...thanks

FlyinRyan 06-12-2011 02:48 PM

Re: Throttle Body: Should or Shouldn't I???
 
Replied to your PM- Bigger is better, BUT you get into a area of diminishing gains. For a mostly stock 4.7 68mm at the blade is enough, I make up for the smaller blade by enlarging both the inlet and the backside. If you have money to burn and plan on more mods? go for it. If not? Dont worry about it too much.


All times are GMT -5. The time now is 05:44 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community