Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f181/)
-   -   2006 Jeep Grand Cherokee po700 code (http://www.jeepgarage.org/f181/2006-jeep-grand-cherokee-po700-code-25396.html)

Midnightrida 07-07-2011 02:44 PM

2006 Jeep Grand Cherokee po700 code
 
So i have an automation 2006 jeep grand cherokee with the 4.7L V8 and has been nothing but problems since purchased it used at about 75000 miles(82,000 miles now), my most recent issue seems to be the po700 error, i was driving through my neighborhood and it pop'd the code right after i knowticed how bad the car felt. when shifting between park driver and reverse it would make loud noises and i could really feel the shift and when driving it was like it would have a hard time shifting gears or wanted to stay in the low gears. The oddest part is that when i went to take it to the shop(day after incident…..Today) it felt fine but the check engine light was still on. At this point its at a local shop but what do you think is going on? im guessing maybe a bad tcm or something as all fluids are perfect and ive been in and out of 2 Dealerships since there so bad at diagnosing and fixing my other problems ive been having.
Let me know what you think!!
Thanks

robpp 07-07-2011 03:03 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
p0700 MEANS there is a DEEP code in the TCM. it will need a dealer to tell you what code is really on. why its on and what it is could be anything. pay the stealer the 99 or whatever they want to get you that code/

there are MANY trans TSB for 05/06 about filters coming apart and stuff like that. see wkjeeps.com

Frankie has an 06 got a new trans at like 40K miles so do not consider the light trivial and ignore it.

Midnightrida 07-07-2011 03:11 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
yeah i read about needing to get the code from the tcm, i did not take the transmission code lightly…. my family just had to rebuild a truck tranny but luckily it was on warranty but weve been uneasy about that stuff lately. As of now the car is at are friends transmission shop so hopefully they can pull the code from that and i can avoid the stealership.

robpp 07-07-2011 03:14 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
unless they have a starscan they will NOT pull be able to pull the code fromthe TCM.

Ai also avoid the stealer but sometimes it makes sense to pay for the code........and then move it to a indy shop for repair.

Midnightrida 07-07-2011 03:17 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
well so much for saving some money, ive been going to the dealer since most of my issues have been dealer only things like my cat…. oh well thanks for the help

06HemiWK 01-24-2014 03:19 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
Did you ever find out what's going on? Mine is having a weird shift problem when turning right and giving it gas around the corner

SgtsDad 03-08-2014 11:05 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
My 2006 hemi 545rfe tranny had a p0700 and p0841 and p0944 error. All were detected by my OBDII scan tool from Sears. After searching this forum and other site forums, I suspected that since the problem was sudden (worked one night and wouldn't shift the next morning) that it probably was not a failure. But who can tell until a tech digs into the tranny.
Turns out the issue was due to the main transmission filter coming loose from the pump seal. seal was replaced, tranny flushed and my jeep is back and running for $281. It could have been much worse.

You issues could be related to the filter if it uses the same one mine does. One of the other symptoms of my model is the upper filter tube that fits into the pump seal will split and cause a fluid draw problem due to it sucking some air through the split in the plastic.
:thumbsup:
best of luck.

Marty

06HemiWK 03-09-2014 10:56 AM

Awesome thanx! Had a sketchy dealer pull my trans and send it to a shop for rebuild and install it back on a year ago. Going to have them fix it again. They tryied to tell me a ur ago I had a shift kit in it, when it was a lease vehicle from day one it came out. Thanx for the info

lil al 09-12-2014 03:42 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
hey .. I having same code pop up I have the diablo tuner.. I clear it .. and runs fine .. however im also curious if I shud be worried I have a warranty on truck and wonder if I shud have this addressed? I knoticed it happens usually when I use the stickmatic aggressively .. =/

lil al 09-12-2014 03:50 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
Quote:

Originally Posted by SgtsDad (Post 988440)
My 2006 hemi 545rfe tranny had a p0700 and p0841 and p0944 error. All were detected by my OBDII scan tool from Sears. After searching this forum and other site forums, I suspected that since the problem was sudden (worked one night and wouldn't shift the next morning) that it probably was not a failure. But who can tell until a tech digs into the tranny.
Turns out the issue was due to the main transmission filter coming loose from the pump seal. seal was replaced, tranny flushed and my jeep is back and running for $281. It could have been much worse.

You issues could be related to the filter if it uses the same one mine does. One of the other symptoms of my model is the upper filter tube that fits into the pump seal will split and cause a fluid draw problem due to it sucking some air through the split in the plastic.
:thumbsup:
best of luck.

Marty

Hi Marty I just read this ... =] is it sumthing that shud be taken care of right away? I do hear a faint sound of air ... now that u mention it I wondered if I had a exhaust leak. sound is up front sumwere buy Cats.. i got chk engine light ran the diblo tuner scan said po700 ive gotten that code once or twise it only happens when i get aggressive with the stickmatic i cleared it and is running fine ?
thank in advance if u answer :D

06HemiWK 09-15-2014 03:34 PM

Re: 2006 Jeep Grand Cherokee po700 code
 
The filter is known for coming loose and I would take care of it b4 you warranty runs up. My lights would go crazy on the dash and throw a code. My abs sensor and wheel bearings went out. If you notice slipping it's ur filter or bad orings inside the tranny


Sent from my iPhone using JeepGarage


All times are GMT -5. The time now is 08:38 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community