Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Grand Cherokee - WK (http://www.jeepgarage.org/f5/)
-   -   XenonDepot Xtreme HID's (http://www.jeepgarage.org/f5/xenondepot-xtreme-hids-2558.html)

White Chocolate 09-08-2009 12:34 AM

XenonDepot Xtreme HID's
 
Well I got my HID's in the mail on Friday and now that I have some free time I'm going to look into installing my low and fog HID's. Now I want it to be a relatively simple install so I wont be pulling off the front bumper. But my question is does anyone have any idea on where they mounted their Ballasts and relays and all that fancy jazz that comes with the Xtreme kit from XenonDepot.

Pictures would be GREATLY appreciated. Also the positive and ground wires on the hardness, the connectors look very small, are they going to fit on the battery terminal??

Pictures for anything would be awesome. Thanks ya'll.

Robert Palmer 09-08-2009 01:06 AM

Re: XenonDepot Xtreme HID's
 
Ok ship your HID kits out to me, I will have them installed on my Jeep, then take a picture for you, mail that out and you can use that as a reference when you buy your next set. Sound good? :D

08Hemi 09-08-2009 03:52 AM

Re: XenonDepot Xtreme HID's
 
And if shippng to ny is too far you can ship them to Cali and I will do the same thing for you! I will even do a "how to" tutorial!! Hahaha alot of help we are

DAVY27 09-08-2009 08:18 AM

Re: XenonDepot Xtreme HID's
 
ill get some pics up of my setup later...eating breakfast n gettin redy 4 school :(

B.P.O.D 09-08-2009 11:30 AM

Re: XenonDepot Xtreme HID's
 
can you take a pic of everything you got? it is easy to install and i can help ya

Scottina06 09-08-2009 12:37 PM

Re: XenonDepot Xtreme HID's
 
I mounted my xtreme passeneger ballast on the inside fender. I cleaned the area really well with alcohol and then used the double stick tape provided. I stuck the drivers side to the front of the battery. Never had a problem.

The install is very easy.....connect the bulb to the harness, connect to the ballast, run the power wire to the positive terminal on the battery and the ground to the inside fender oem ground screws.(located about 12" up the fender on the inside) Mount and zip tie everything and you are ready to go.

White Chocolate 09-08-2009 02:45 PM

Re: XenonDepot Xtreme HID's
 
Quote:

Originally Posted by Scottina06 (Post 58533)
I mounted my xtreme passeneger ballast on the inside fender. I cleaned the area really well with alcohol and then used the double stick tape provided. I stuck the drivers side to the front of the battery. Never had a problem.

The install is very easy.....connect the bulb to the harness, connect to the ballast, run the power wire to the positive terminal on the battery and the ground to the inside fender oem ground screws.(located about 12" up the fender on the inside) Mount and zip tie everything and you are ready to go.

You got any pictures of your install? what did you do with your fogs?

Scottina06 09-08-2009 03:14 PM

Re: XenonDepot Xtreme HID's
 
sorry I dont. I have the oem HID's now or I wopuld take pics. I have silverstars in my fogs.

DAVY27 09-08-2009 06:51 PM

Re: XenonDepot Xtreme HID's
 
What Scott said, in front of the battery
http://i301.photobucket.com/albums/n...MeGoLd/001.jpg
http://i301.photobucket.com/albums/n...GoLd/002-1.jpg
other ballast is mounted on the coolant screw..very visible and i think imma find a new place for it. For now here ya go
http://i301.photobucket.com/albums/n...MeGoLd/004.jpg
http://i301.photobucket.com/albums/n...GoLd/003-3.jpg
mine to the negative battery
http://i301.photobucket.com/albums/n...GoLd/006-2.jpg
i dont have the xenondepot Hids but they all should be similar.

DAVY27 09-08-2009 06:52 PM

Re: XenonDepot Xtreme HID's
 
hope this helps...HID's are gettin shipped to me for my fogs so imma need this thread for placement too :D

White Chocolate 09-08-2009 09:39 PM

Re: XenonDepot Xtreme HID's
 
My question is, can the Xtreme ballasts be put onto metal? I was told with my cheaper HID kits that to not put the ballasts on metal surface because it will ground out and short the ballast.

Now my question is can I put these ballasts on metal? Or should I also stay away from the metal surfaces under the hood?

Scottina06 09-08-2009 09:54 PM

Re: XenonDepot Xtreme HID's
 
I had mine like I said above and never had a problem


All times are GMT -5. The time now is 04:21 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community