Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f203/)
-   -   Low washer fluid (http://www.jeepgarage.org/f203/low-washer-fluid-25768.html)

rayray 07-15-2011 10:32 PM

Low washer fluid
 
Hi My 2000 grand cherokee started acting a little funny today.
the warning for low washer fluid came on for a split second. after a few times we stopped and toped off the fluid. it wasnt low only about an inch below the cap. after a few miles the warning "chimed" again and the warning came on for a split second. this went on for the last 200 miles of our trip.

any ideas?

thanks Ray

Frango100 07-16-2011 10:55 AM

Re: Low washer fluid
 
Can be a defective float switch or shaved through wire.
I also heard sometimes about solder problems on the EVIC circuit board.
But i would start checking the wiring for shaving.

rayray 07-16-2011 01:41 PM

Re: Low washer fluid
 
thanks ill look into the wires

rayray 07-23-2011 06:43 PM

Re: Low washer fluid
 
the wires look good but, now the display it showing a low cooling light once in a while
no pattern. Guess its time for a new evic unit

Frango100 07-24-2011 03:22 PM

Re: Low washer fluid
 
I would disconnect the wires to the float and see if the message still appears. When yes, it could be one of the solder points in the EVIC. If you are handy with a soldering gun, you could probably solder it yourself.
But it still could be one of the wires going from the float to the EVIC. It doesn't have to be in the engine bay itself.

rayray 07-24-2011 08:32 PM

Re: Low washer fluid
 
i think its the evic it went from the low washer fluid to low coolant. the low washer fluid warning has disappeared since the low coolant warning has come

Frango100 07-24-2011 09:56 PM

Re: Low washer fluid
 
I red over the coolant word, was thinking it was still the same problem. Don't know the price for a new (or used) EVIC, but have a look at the solders first if they are not loose, could safe you some money.

rayray 07-25-2011 02:55 PM

Re: Low washer fluid
 
i can solder pretty well so im going to pull the EVIC out over the weekend and see if i can find anything wrong. If i cant find any loose connections im going to look for a used EVIC


Thanks for you suggestions
Ray


All times are GMT -5. The time now is 05:17 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community