Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Members Rides (http://www.jeepgarage.org/f14/)
-   -   CruizinKev's Jeep WJ 4.7 (http://www.jeepgarage.org/f14/cruizinkevs-jeep-wj-4-7-a-26121.html)

CruizinKev 07-23-2011 02:07 PM

CruizinKev's Jeep WJ 4.7
 
So this is my 2000 Jeep GC WJ 4.7 - just bought it 3 weeks ago :D

http://i60.photobucket.com/albums/h1...eep/kevswj.jpg

http://i60.photobucket.com/albums/h1...p/IMG_1699.jpg

Installed a new Sony radio and new tweeters in the dash, debadged sides and replaced front & rear emblems with some new ones. I just took off the roof rack for a cleaner "street look".

http://i60.photobucket.com/albums/h1...p/IMAG0397.jpg

Also got rid of the stock muffler and replaced it with a magnaflow - but will be replaced with a flowmaster 50 SUV next week :thumbsup:
Today I cut the stock exhaust tip and put on a 2.5in/3.5out tip.

http://i60.photobucket.com/albums/h1...3/IMAG0402.jpg
http://i60.photobucket.com/albums/h1...3/IMAG0406.jpg

I already ordered new outer windowstrips, smoked LED taillights and black 20x9 SRT8 replicas. I also want to wrap the wooden interior with some 3M carbon vinyl and want to paint the headlights black like laredo headlights.
well I got a few more plans for it like Bilstein HD shocks, tinted windows and so on.. :D:rolleyes::thumbsup:

robpp 07-23-2011 02:50 PM

Re: CruizinKev's Jeep WJ 4.7
 
thats very clean; looks great. tasteful mods/

Chuck 07-23-2011 03:26 PM

Re: CruizinKev's Jeep WJ 4.7
 
Looks great!

r1concepts 07-25-2011 05:32 PM

Re: CruizinKev's Jeep WJ 4.7
 
looking good and congratz on the purchase!

Martyp 07-26-2011 03:57 PM

Re: CruizinKev's Jeep WJ 4.7
 
Looks great as does your future mod list! Oh, add a rear wiper arm/blade to it tho! :)

Debadging is a PITA huh? I don't know what they use in that glue, but I'd say it'd survive an atomic blast! :D

Also, be sure to fill/cover the roof rail holes in the roof as they do actually let water in if left open! :thumbsup:

CruizinKev 07-26-2011 10:31 PM

Re: CruizinKev's Jeep WJ 4.7
 
thx :) yeah I'll sand and repaint the rear wiper arm thats why I took off. debadging was pretty easy but I used solvent to clean that glue. yeah I'll cover the roof rail holes, at the moment I just sticked some black electrical tape over them ;)

CruizinKev 04-04-2013 03:45 AM

Re: CruizinKev's Jeep WJ 4.7
 
time for an update ;)

what it looked like few month ago

http://i60.photobucket.com/albums/h1...p/IMAG0692.jpg

I added a magnaflow high flow cat and changed the exhaust tip with the "trans am style" tips that I had laying around.

http://i60.photobucket.com/albums/h1...402_185426.jpg

did some more cutting and adjusting and it turned to that

http://i60.photobucket.com/albums/h1...403_183200.jpg

I heatened the headlight in the oven (220F) for about 5min and opened them. then started with 800 grit wet sand paper. sprayed two coats of high temp flat black and let it dry a day. then put it all back together and put the headlight back in the oven again for about 5mins. that way the glue will hold/stick the parts back together.

http://i60.photobucket.com/albums/h1...p/IMAG0733.jpg

blacked out.

http://i60.photobucket.com/albums/h1...211_173855.jpg

here's another before pic.

http://i60.photobucket.com/albums/h1...207_130332.jpg

with the "new" headlights.

http://i60.photobucket.com/albums/h1...216_161653.jpg

ok what else? rancho steering stabalizer, wheel spacers all around, 2" spacer lift and upcountry spring so the Jeep is 3" lifted by now. I'll replace the UC springs with OME 2" springs so my WJ will be lifted 4" soon. anyways, that's what it looks like now.

http://i60.photobucket.com/albums/h1...04_1532261.jpg

you see wheels are stock and tiny - I'm using these as wintertires because the tires are new.. for summer I got black 8x16 Soft 8's wheels with 265/75-16 Goodyear Duratrac.

began with the interior sound deadening.

http://i60.photobucket.com/albums/h1...322_174800.jpg

http://i60.photobucket.com/albums/h1...322_174806.jpg

http://i60.photobucket.com/albums/h1...322_182001.jpg

it's like dynamat but this is 2.2mm thick. had my ex-mustang with this and also my 1979 chevy frame off and happy with the results.

pic from work.

http://i60.photobucket.com/albums/h1...325_143647.jpg

yeah ok that's it so far! :D

Gojeep 04-06-2013 07:32 AM

Re: CruizinKev's Jeep WJ 4.7
 
Headlights came out great. :)

CruizinKev 06-16-2013 10:18 AM

Re: CruizinKev's Jeep WJ 4.7
 
thanks!

updated pics:

http://i60.photobucket.com/albums/h1...615_135145.jpg

http://i60.photobucket.com/albums/h1...615_135201.jpg

http://i60.photobucket.com/albums/h1...615_135213.jpg


All times are GMT -5. The time now is 01:56 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community