Gear box and other problems
Hi Every one
This is my first post hope you can help. My jeep is causing me sleepless nights.
(Fault History) I am from the UK and have a 2006 Cherokee 5.7 Hemi overland with 57000 miles I have had the car from new it has never been used off road or in any accident. 6 months ago I started having problems where I would select any gear but have no drive, it was like the car was still in park or neutral. The main dealer changed the gear box oil and everything seemed fine. After around 1500 miles the problem returned, so it was back to the dealer same thing changed the gear box oil and sent me on my way. Short time after it was back this time you could smell the burning oil and clutch. This time the main dealer said the box was so badly damaged it needed replacing. By this time my faith in the dealer was nil the cost they wanted to replace the box was in the regain of £4500.00 plus labour and they were not prepared to take into account the £1000.00 they had had off me for replacing the gear box oil twice.
(Moving on 1) I then located an independent auto gearbox firm who charged £2500.00 for a new replacement box. All was fine for a few weeks the car drove like new again, I then started getting surges when the car changed gear sometimes these were very harsh. Back to the independent who had re looked at it and reset the gearbox he advised me that he had fault showing that the brake light switch was faulty and fault code P1697 mileage incorrect. Although the car was driving ok And I needed to have these looked at.
(Moving on 2) I then start getting the parking sensors showing faulty and sometimes bleeping for no reason, the car now has started to stick in 3rd gear when its driven and sometimes shows something like gearbox over temperature.
(Moving on 3)
I have now replaced the brake light switch cleared the faults using ODB 11 Tools it still shows P1697 this will not clear, parking sensors sill show faulty (not sure if this is connected) still sticks in 3rd gear.
I need to understand it all this is related in any way, could the new faults be down to the new gearbox or am I just unlucky and have new unrelated faults.
What do I do next without spending lots more cash.
Please help, If I thought the car would make it to a cliff, I would drive it off.
Re: Gear box and other problems
There is a related starcase to your p1697. Ultimately it will take the dealer going into the module and resetting the mileage, even if its currently "correct" in the module and it will resolve that code.
how do you know your in 3rd gear? Limp in in the RFE is 2nd gear iirc. Some things that worry me are was the cooler flushed and flow verified during the trans replacement? I have seen metal debris in "reman" torque converters cause problems in freshly remanufactured transmissions. Ultimately I think there is some puzzle pieces missing with this, there has got to be fault codes in the system for why its in limp in and the P1697 is not one that should cause limp home mode. Driving it in this condition could be the cause for your trans temp light as your torque converter is the heat factory and launching in 2nd or 3rd would cause some SERIOUS heat buildup if driven on.
Re: Gear box and other problems
Thanks for the info so far.
Quick update, Gearbox now sorted I have all my gears back. My local Auto transmission garage in Barnsley (Martin Lowe) Great firm by the way very professional would recommend. Found a broken wire in the loom.
I still have Codes B1260 PTS sensor 6 ring time too short (which is sensor 6)? And also code P1697 ERM (SRI) Mileage not stored.
Can anyone help.
|All times are GMT -5. The time now is 09:47 PM.|
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community