Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Grand Cherokee - WK (http://www.jeepgarage.org/f5/)
-   -   halo question (http://www.jeepgarage.org/f5/halo-question-27984.html)

tri0829 09-02-2011 11:01 AM

halo question
 
so i got new halos for my fogs for my birthday because the others started dying and crap and water got into my fogs so basically i figured id do it right this time and bought the falshtech ones. my question is that they came with a voltage regulator but im not sure how to mount this and stuff the directions are pretty detailed but i dont get if i have to run each led to it or just hook them up together and run one wire to it. also where is a good mounting place.

thanks for the help

robpp 09-02-2011 11:22 AM

Re: halo question
 
pic of the regulator


looking at the wires:

red top left is battery power
black bottom left is ground

top right is trigger. I use a switch. HOW DO ZYOU WANT THEM TO COME ON: put that wire in this location.

the rest......top is power and lower is ground for all your rings. in my pic I have 4 rings wired in.

the little screw at the very top on the blue thing......that the adjuster.

your rings came with a max voltage on the bag, set they regulator to NOT exceed that.

you'll need to find the proper voltage using a multi-meter on the terminals and turning the screw.

http://i300.photobucket.com/albums/n...er/halo_14.jpg

tri0829 09-02-2011 01:32 PM

Re: halo question
 
okay thanks a lot very helpful

robpp 09-02-2011 02:58 PM

Re: halo question
 
you can also ask wes@flashtech or call them. they have a PDF but of course my PIC is better.

you may want to consider mounting yours in a box similar to mine to keep it safe and dry.

DaBigBone 09-02-2011 03:12 PM

Re: halo question
 
Where did you get that box Rob? I need to wire mine up as well

robpp 09-02-2011 04:31 PM

Re: halo question
 
radio shack. 3-4 bux. then over to lowes for some screws ans washers. prolly spent 8 bux. i mounted the regulator to the TOP of the box this way when i oen it the wires are in sight. if you bury it in the box a bit tougher to mess with.

tri0829 09-02-2011 09:29 PM

Re: halo question
 
i got them all set up based on your pic thanks for the help, i just stuck it next to the battery with some 3M tape i want to mount it a little better at some point but i think that its good for now. thanks for all the help

Crestwood1001 09-02-2011 09:53 PM

Re: halo question
 
Rob your a crazy man lol your work is always so neat and tidy...


All times are GMT -5. The time now is 03:56 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community