Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Interior/Exterior/Visual (http://www.jeepgarage.org/f182/)
-   -   Taillight push pins too big for LED tails (http://www.jeepgarage.org/f182/taillight-push-pins-too-big-for-led-tails-29351.html)

JBSVT 10-05-2011 01:15 AM

Taillight push pins too big for LED tails
 
Hey guys,
Sorry for the dumb question, but I was wondering where to get some smaller push pins for the taillights on out Jeeps?

The problem i'm having is I just got some 05-06 LED tails and the harness from Lips installed onto my Jeep only to find out the original push pins are now too big for the aftermarket LED tails. If anyone has any input, it is much appreciated. Thanks. I tried searching and couldn't find anything on this "issue"

Scottina06 10-05-2011 10:23 AM

Re: Taillight push pins too big for LED tails
 
my 06 uses the torx screws for the tails....maybe try some of those

BlackedOutWK 10-05-2011 01:08 PM

Re: Taillight push pins too big for LED tails
 
i think ive read before that most people just drill the holes out a little bigger...but i would wait for someone who has done it to chime in first.

JBSVT 10-06-2011 12:32 AM

Re: Taillight push pins too big for LED tails
 
Thanks for the help guys. I ended up buying some smaller tabs at Lowe's and drilling out the holes a little bigger. Got the new tails on now and they are bright.


All times are GMT -5. The time now is 03:06 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community