Jeep Garage  - Jeep Forum banner

55W hid's

3K views 19 replies 9 participants last post by  XenonDepot 
#1 ·
so just bought 5000K 55w hid's lows and fogs and they wouldnt turn on so i realized i needed a relay. should i just return them for the 35w ballasts or just get a relay for each light?
 
#4 ·
Yeah, typically the relay harness will encompass both ballasts - wired for both.
 
#7 ·
IMO.....I would use a single relay for each lamp....may cost you more now.....but save you some work and heartache down the road. For example-what if that one relay for two lamps fails? Both lamps are OUT.
 
#8 ·
I agree, I have a relay for each lamp.

Also IMO 55W HIDs are WAY to bright for halogen headlights. You'll be blinding every oncoming driver.
 
#10 ·
hit up xenondepot!

i have 55w and make sure to properly aim them. They will be BRIGHT!
 
#17 ·
Iv got 55w's in my fogs with no problems

Sent from my BlackBerry 9650 using Tapatalk
 
#19 ·
Never been flashed, I took care to aim them so they are still useable, but not to high, they are a tad higher them my low beams, and are alot brighter them my headlights.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top