Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Grand Cherokee - WK2 - (
-   -   Jerry Urling (

jerry urling 11-05-2011 02:14 PM

Jerry Urling
New member
I had 2 new key fobs programed by the dealer yesterday and my 2011 jeep will not let me start the car, or will it let me lock/unlock form outside the car. Is there something I need to do myself or can do myself, the dealer has no people working today.

Scottina06 11-05-2011 03:40 PM

Re: Jerry Urling
welcome Jerry!

Can you get the doors open at all? If so...go under the pass seat and pull the negative cabel or under the hood on the pass firewall.

moosehead 11-05-2011 06:53 PM

Re: Jerry Urling
You can use the mechanical key inside each fob to open the door via keylocks, and then try the fob itself in the ignition and turn to the right as you would a normal key. The "ignitiom" key slot is beneath the push button start button which pops off.

Note the alarm will likely go off once you enter via mechanical key, but once you turn the fob in the dash it will stop.

All times are GMT -5. The time now is 04:45 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community