Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Engine Performance/Intake/Exhaust (http://www.jeepgarage.org/f183/)
-   -   Exhaust cut out help (http://www.jeepgarage.org/f183/exhaust-cut-out-help-32046.html)

dudedrt 12-04-2011 10:28 PM

Exhaust cut out help
 
Hey guys im kinda new here, but ive been wanting to put exhaust cut outs on my 05 jeep wk 5.7. Anybody have any ideas on what i should get. Any help is appreciated :)

kennzz05 12-06-2011 03:26 AM

Re: Exhaust cut out help
 
from marylandspeed.com

(of 3 products)Result Pages: 1 Product Name+ Manufacturer Price Buy Now http://marylandspeed.com/product_thu...jpg&w=100&h=47DMH "Low Profile" Electric Cutouts (Pair) http://marylandspeed.com/product_thu....jpg&w=98&h=36 $499.95 $399.95 http://marylandspeed.com/templates/E...on_in_cart.gif http://marylandspeed.com/product_thu....jpg&w=80&h=60DMH "Original" Electric Cut Outs (Pair) http://marylandspeed.com/product_thu....jpg&w=98&h=36 $399.95 $320.00 http://marylandspeed.com/templates/E...on_in_cart.gif http://marylandspeed.com/product_thu....jpg&w=80&h=60DMH "Original" Electric Cutouts (Single Unit) http://marylandspeed.com/product_thu....jpg&w=98&h=36 $225.00 $179.00 http://marylandspeed.com/templates/E...on_in_cart.gif

Stickerbombed 12-09-2011 03:52 PM

Re: Exhaust cut out help
 
I want to do this too, please let me know how it goes for you

dudedrt 12-12-2011 10:46 PM

Re: Exhaust cut out help
 
How do you go about installing them. Is it hard? how can i wire them up and would they go before the cat or after?

jeepgcoman 12-12-2011 11:48 PM

Re: Exhaust cut out help
 
They have to be after the cats. You'll probably need to have it installed by a muffler shop, but any wiring (if you get the electrically controlled ones) can be done by you. Also, your 5.7 only has a single exhaust, so you don't need two of them. Make sure you get the correct tubing size too.

misfit77 12-23-2011 02:29 AM

Re: Exhaust cut out help
 
I have had QTP and Badlandz...both have fallen apart on me.

I once ordered a McCord powerplate, but they took too long and I canceled my order.

mehow 08-26-2013 12:01 AM

1 Attachment(s)
What do you guys think about these electric cutouts, it says no welding necessary! Let me know what you think because I really want these.

Attachment 28282

jeepgcoman 08-26-2013 05:08 PM

Re: Exhaust cut out help
 
When I had mine done, I could have gotten an electric one, but it was way more $$$ and I only use mine when I go racing. It was welded in place though, behind the cat. When open, it does affect the 2/2 O2 Sensor readings....nothing that causes an issue though.

mehow 08-26-2013 10:52 PM

Did u have any problems with it besides the code?

suzieque 08-27-2013 10:17 AM

Re: Exhaust cut out help
 
I recall reading a thread about cutouts that operated manually with a cable. the comment was that the manual version avoided the issues related to wiring and rattling as well as failure of the electric motor due to heat.

jeepgcoman 08-27-2013 10:30 AM

Re: Exhaust cut out help
 
I never did get a code, but I was monitoring it with my DashHawk, and it was giving "out of range" voltage readings. That, by itself, wouldn't be a problem. I really love the sound of it.....but the wife doesn't. I uncap it at home, drive to the races, and then recap when I get back home. Sooooo cool sounding!! In my past (many years ago) experience, the cable controlled ones didn't seal real well, but the electric ones were pretty good. They're kind of like a mini waste gate. Years ago I worked on a street legal, high performance '41 Willys with electrically controlled collectors. It was totally quiet driving down the street and, with the flip of a switch, it was race ready in about 3 seconds. Bet that was a fun one to drive.

Edit: Also, some folks used to put washers between the cutout and the cap. This way it looked closed, but basically had an exhaust leak making it sound pretty cool, depending on how many washers you used. As I recall, 3-4 under each bolt made it sound about right.

mehow 08-27-2013 10:32 AM

I'm looking at the electric cutouts and my only worry is it leaking


All times are GMT -5. The time now is 10:07 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community