Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Tech Tips DIY/How To (http://www.jeepgarage.org/f75/)
-   -   Hallo :) (http://www.jeepgarage.org/f75/hallo-34645.html)

Kamil 83 01-24-2012 06:35 PM

Hallo :)
 
Hi , Well its my firs time on any kind of forum ...:D But I would love to share with you guys with my builds and project witch some of them got finish , and on some of them Im still working whenever I can :)
I owned many different kinds of jeeps from lifted build nitrous wranglers , through , Big massive Zj s ,and now my new toy :) 06 grand Cherokee Limited 5.7 Hemi
My goal is to build an srt8 off clone with BIG bolls and weary aggressive look .

I already start doing some exhaust work , and few other mods :)

Thanks

Kamil 83 01-24-2012 06:37 PM

Re: Hallo :)
 
I will also post a pics how easy was to get the exhaust working and how i tricked the tire pressure sensor .
Thanks :violin:

Scottina06 01-24-2012 07:50 PM

Re: Hallo :)
 
welcome!

SRTgirl 01-24-2012 08:03 PM

Re: Hallo :)
 
:) Hello! Welcome to Jeep Garage :)

JETLIFE 01-24-2012 08:14 PM

Re: Hallo :)
 
Quote:

Originally Posted by Kamil 83 (Post 559859)
and how i tricked the tire pressure sensor .
Thanks :violin:

I'm curious if you did the same thing as me, Make sure you post how you made yours!

Knightrider03m 01-24-2012 08:20 PM

Re: Hallo :)
 
Welcome!

SvenskaJeepGuy 01-24-2012 08:51 PM

Re: Hallo :)
 
welcome

Gus9890 01-27-2012 12:52 AM

Re: Hallo :)
 
Welcome!

mrjaydeeone 01-27-2012 12:07 PM

Re: Hallo :)
 
Welcome to JeepGarage|

Kamil 83 01-27-2012 07:18 PM

Re: Hallo :)
 
Hi ,
Wow thats nice :) I really wost expecting so many people getting back to me ...Thats nice :) Its nice to know you are not alone with your jeep passion ;)
Thank you All

Kamil 83 01-27-2012 08:34 PM

Re: Hallo :)
 
ok so here is what i got with tps .
In order to install stock srt8 exhaust i had to remove spear tire , Right after that ...:)
Of course -CHECK YOUR SPEAR TIRE PRESSURE- so here is what I did .
I used 3'' PVC pipe witch holds up to 260 PSI !!! cut about 10'' long piece.I used primer and pvc cement combo .
Before i glued everything together i drilled the hole in the cup so i could install my sensor.
HERE IS THE TRICK!!!! Before you take everything together make shore the valve is out the sensor , so the air and bad corrosive fumes from cement got easy way out .
let it dry for about 2 h in room temp .
I did that mode a week ago , the temperature was up and down , so far no problem .
Im going to mount it under car , now i got it in the trunk for easy access for testing

Kamil 83 01-27-2012 08:34 PM

Re: Hallo :)
 
http://%3Ca%20href=%22http://s1271.p...%22%3E%3C/a%3E


All times are GMT -5. The time now is 02:05 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community