Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Performance Modifications (http://www.jeepgarage.org/f6/)
-   -   Where does the powerwire go? (http://www.jeepgarage.org/f6/where-does-the-powerwire-go-3558.html)

Martyp 10-24-2009 11:26 AM

Where does the powerwire go?
 
Hi guys,


Just wondering where about I fit the PW to my 4.7 WJ?

I've taken some pics of the TB if required...

Thanks in advance! :thumbsup:

AIR_RAM 10-24-2009 11:33 AM

Re: Where does the powerwire go?
 
The POWER WIRE plugs in between your Air Temp Sensor and the harness.

Locate your AIR TEMP SENSOR and just put the POWER WIRE in between the two.

Depending on the year of your engine, will determine the sensor location.

1) Its either going to be on the INTAKE MANIFOLD on the DRIVERS SIDE, 2nd INTAKE RUNNER from the back. GREY PLUG with 2 WIRES.
2) or it will be located on the RESONATOR... on the JEEPS Im not exactly sure where but it will be the ONLY sensor on the intake resonator with a GREY PLUG with 2 WIRES.

Your POWER WIRE should come with instructions on how to install it correctly.

If you have any questions please feel free to contact me.


SPEED SAFE, AIR RAM

Martyp 10-24-2009 11:39 AM

Re: Where does the powerwire go?
 
Thanks for the info!

I have two plugs on the TB, one with 3 pins (TOP) and one with 4 pins (bottom).

Sure I saw a 2 pin plug on under those, maybe attached to the Intake Manifold?

Scottina06 10-24-2009 11:43 AM

Re: Where does the powerwire go?
 
it plugs into the IAT wire and then into the iat plug in your intake hose

Frankie 10-24-2009 11:50 AM

Re: Where does the powerwire go?
 
Just like Scott said, you pull off the wire going to your IAT sensor and then put the powerwire between it!

Its prob a bit different for you, but here is how it looks on mine...

http://img39.imageshack.us/img39/6668/dsc02853i.jpg
http://img39.imageshack.us/img39/3637/dsc02854b.jpg
http://img97.imageshack.us/img97/2479/dsc02855k.jpg
http://img42.imageshack.us/img42/5372/dsc02856sc.jpg

Martyp 10-24-2009 12:02 PM

Re: Where does the powerwire go?
 
Thanks for the pics Frankie!

So just to confirm, the 2 pins go into the grey connector attached to the TB and the blue connector goes into the hose?

mzh29 10-24-2009 01:27 PM

Re: Where does the powerwire go?
 
Frankie how do you like the wire?

Scottina06 10-24-2009 01:33 PM

Re: Where does the powerwire go?
 
Quote:

Originally Posted by Martyp (Post 85718)
Thanks for the pics Frankie!

So just to confirm, the 2 pins go into the grey connector attached to the TB and the blue connector goes into the hose?


yes

DAVY27 10-24-2009 01:40 PM

Re: Where does the powerwire go?
 
great thread! was wondering about this also!

robpp 10-24-2009 02:17 PM

Re: Where does the powerwire go?
 
actually martp, the greuy part went onto the air tube part, the open end, the 2 pins went into the exisiting wire. then i used some electrical tape on that end to protect from water.

AcidCold 10-24-2009 02:52 PM

Re: Where does the powerwire go?
 
Wonder if this would benefit me also?

Frankie 10-24-2009 02:58 PM

Re: Where does the powerwire go?
 
IMO - I cant really tell a diff although the temp does read about 10degrees cooler!


All times are GMT -5. The time now is 09:14 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community