Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Audio, Video, Navigation & Electronic Modifications (
-   -   Little Help (

CatMan879 10-27-2009 02:50 PM

Little Help
Does anyone know the connector i need to connect the Factory Back up Camera to an aftermarket Head Unit Specifically the Pioneer AVH P4100dvd

Matt 10-27-2009 02:58 PM

Re: Little Help
I'm guessing the factory plug/wire is proprietary... can you take a pic?

saleen032 10-27-2009 03:05 PM

Re: Little Help
Post up a pic...More then likely you are going to need a RCA style connector and wire it to the factory wire...Thats what i ended up doing...

Here is what you could use

CatMan879 10-27-2009 03:25 PM

Re: Little Help
yea i need an RCA connector but ill get a pic when i start working on it i just took a quick look behind there earlier and then my wife started bitching about cleaning the house so i just need to finish up a few things and ill get started on it it might be an all night ordeal for me but i like this kind of stuff

CatMan879 06-23-2011 08:39 PM

Re: Little Help
Ok well I am bringing this issue back up if anyone can help me I know I need an RCA Plug, that's easy enough I have done plenty of wiring in my days and I am not worried about it. What I am worried about is the actual pin out.

3 Dark Green / Brown CAMERA SIGNAL
4 Dark Green / Orange CAMERA RETURN
5 Dark Green / White CAMERA SHIELD
6 Gray / Brown VIDEO SIGNAL 1
7 Gray / White VIDEO COMMON 1
8 Dark Green / Tan VIDEO SHIELD 1
9 Gray / Light Blue VIDEO SHIELD 2
10 Gray / Yellow VIDEO COMMON 2
11 Dark Green / Brown VIDEO SHIELD 2

I understand the camera is 3, 4, and 5. but do the other video outputs have anything to do with it? Also I know that shield should go to ground and signal to signal but where would return go would that just splice in with signal???

Thanks for all your help guys and i think this will help out in the future.

CatMan879 06-24-2011 10:33 PM

Re: Little Help
Bump... any ideas?

CatMan879 06-25-2011 11:27 PM

Re: Little Help
so looking up more info i found out that the shield is not hooked up to the camera at all so i am guessing that signal goes to signal and return to ground does that sound right to you guys?

All times are GMT -5. The time now is 08:54 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community