Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Interior/Exterior/Visual (http://www.jeepgarage.org/f197/)
-   -   Interior LED Question. (http://www.jeepgarage.org/f197/interior-led-question-38340.html)

Toxic Mayhem 03-04-2012 08:21 PM

Interior LED Question.
 
Im trying to find out what LEDs go in the Climate Controls, and in the door switches. You have to soder them in and it says the bulb size on a write up that its PC74 i did the bulb replacement on superbrightleds and came up with this(will those work to soder them in or will they be to big) http://www.superbrightleds.com/cgi-b...cs%2F74-x.html

Or would i need the 5MM LED with Resistor or a 3MM LED with resistor.

Thanks

Amelie 03-04-2012 08:38 PM

Re: Interior LED Question.
 
Quote:

Originally Posted by Toxic Mayhem (Post 586589)
Im trying to find out what LEDs go in the Climate Controls, and in the door switches. You have to soder them in and it says the bulb size on a write up that its PC74 i did the bulb replacement on superbrightleds and came up with this(will those work to soder them in or will they be to big) http://www.superbrightleds.com/cgi-b...cs%2F74-x.html

Or would i need the 5MM LED with Resistor or a 3MM LED with resistor.

Thanks

I don't think a resistor is needed on the dash lights.

Gus9890 03-05-2012 12:12 AM

Re: Interior LED Question.
 
I agree with Reichminister Goebbels

Toxic Mayhem 03-05-2012 12:25 AM

Re: Interior LED Question.
 
You dont need them for the HAVOC controlls or the switches on the door?

Is it the 5mm i need ot the T1 need or what? Im new to the jeeps so any help would be appreciated.

Amelie 03-05-2012 12:26 AM

Re: Interior LED Question.
 
Quote:

Originally Posted by Toxic Mayhem (Post 586785)
You dont need them for the HAVOC controlls or the switches on the door?

Is it the 5mm i need ot the T1 need or what? Im new to the jeeps so any help would be appreciated.

I don't think you can even replace the ones on the door unless you're referring to the 194 bulbs in the driver and passenger doors.

Gus9890 03-12-2012 11:11 PM

Re: Interior LED Question.
 
Make it easier, which do you need resistors for and which do you not need resistors for?


All times are GMT -5. The time now is 05:15 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community