Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f181/)
-   -   Hey boys,have a look at this...tell me what u think! (http://www.jeepgarage.org/f181/hey-boys-have-a-look-at-this-tell-me-what-u-think-38577.html)

harricanfloyd 03-08-2012 07:18 PM

Hey have a look at this heater core video!
 
http://www.youtube.com/watch?v=jFfIvAgqduQ

Imma have to do this.....drilling out four holes and replacing them with a bolts and teflon nuts.....or spot weld.....just happened to buy a 110 volt wire welder too!!! I really dont wanna do the job, but 90$hr@ six hours, plus 98$ just to look at it, a 159$ coolant flush, an 90$ heater core and there's always...."Oh, Mr. Craft, there's one more thing we had to do, but I gave you a discount on that part" lol@dealers

I will report back if all goes good or bad. If good, then make this a sticky!!

garllo 03-09-2012 11:09 AM

Re: Hey boys,have a look at this...tell me what u think!
 
Looks better than pulling the entire dash!

harricanfloyd 03-21-2012 06:05 PM

Re: Hey boys,have a look at this...tell me what u think!
 
I did it. They are only support brackets and luckily I had my trust Harbor freight 110v welder. Originally I was goin to bolt them together but just I tacked the bracket back on and sealed everything up. All good. Ofcourse, I won't be doing this when the blend doors go!! Took me about 3hrs.


All times are GMT -5. The time now is 03:21 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community