Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Engine Performance/Intake/Exhaust (
-   -   Pulling Motor!! (

JeepFreak12 04-16-2012 06:55 AM

Pulling Motor!!
Im pulling the motor, trans, and t-case out of my 99 parts jeep and rebuilding them all. Has anyone pulled the motor? How big of a pain in the butt is it? I know it wont be a walk in the park haha

FlyinRyan 04-18-2012 04:58 PM

Re: Pulling Motor!!
Talk to scjeep4.7ho

scjeep4.7HO 04-18-2012 08:57 PM

It's not really that terrible. I did it alone, in a gravel driveway. Drop the exhaust, leave exhaust manifolds attached, pull resistor, core support, grill all that. Drop both drive shafts, disconnect all electrical harnesses. AC can be unbolted and pulled off to the side while not discharging the freon. You'll obviously need a cherry picker and attack to both large bolts (one on either head) and your going to also need a ratchet strap or something to pick up the end of the Trans to get it to clear the front of the Jeep since it's so long.

Sent from my ADR6400L using Tapatalk 2

JeepFreak12 04-19-2012 06:00 AM

Re: Pulling Motor!!
Thanks for the info.

scjeep4.7HO 04-19-2012 11:51 AM

If you need any specific info just ask

Sent from my ADR6400L using Tapatalk 2

JeepFreak12 04-20-2012 05:45 AM

Re: Pulling Motor!!
Can i fit the 02 4.7 HO forged crank in the 99 4.7?

scjeep4.7HO 04-20-2012 08:54 AM

Yes sir, they are the same crank in specs.

Sent from my ADR6400L using Tapatalk 2

JeepFreak12 04-20-2012 10:52 AM

Re: Pulling Motor!!
Alright cool, thanks alot

All times are GMT -5. The time now is 03:17 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community