Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems Discussion (http://www.jeepgarage.org/f77/)
-   -   Fuse (http://www.jeepgarage.org/f77/fuse-4172.html)

Robert Palmer 11-20-2009 05:10 PM

Fuse
 
Does anyone know the fuse for the low beam headlights?


Thanks!


-Joe

White WK Swagga 11-20-2009 05:27 PM

Re: Fuse
 
http://www.wkjeeps.com/wk_fuses.htm

B.P.O.D 11-23-2009 11:36 AM

Re: Fuse
 
come on joe. i expected a better question from you!!! LOLOLOL

Robert Palmer 11-23-2009 11:59 AM

Re: Fuse
 
It wasnt the fuse that was ****ed up. LOL


Irfan please please do not say shit about technical questions. LOLz

B.P.O.D 11-23-2009 04:51 PM

Re: Fuse
 
hahahaha joe how do you take out hids?!?!?!? lolololol

DAVY27 07-01-2012 11:10 PM

Re: Fuse
 
have to bump this threadddd.......

checked on wkjeeps but i cant find the fuse for the front low beams WITHOUT the HID lamps....

??

Scottina06 07-01-2012 11:19 PM

Re: Fuse
 
whats the problem? There is no fuse

DAVY27 07-02-2012 07:01 AM

Re: Fuse
 
both of my low beams doesnt come on. i checked the bulbs with another set of ballasts and they are fine. If not the fuse, maybe its the ballasts or the wiring harness?
Idk if it matters but it happened when the weather was 100 plus the heat from the ballast itself and the engine bay of the mighty 3.7 might be too much?

kennzz05 07-02-2012 09:18 AM

Re: Fuse
 
have you checked for voltage with a meter at the harness or tried reinstalling regular bulb

DAVY27 07-02-2012 10:01 AM

Re: Fuse
 
not yet but im planning to do some TLC to the Jeep this week so while i have the front bumper off imma relocate all the ballast and check up on the wiring.

Scottina06 07-02-2012 11:07 AM

Re: Fuse
 
well...looks like you have 55w HID's from DDM...so its either the ballasts, fuse or relay on harness or a ground. I dont know your exact setup...so its gonna be impossible to tell for sure. Start with the fuse and relay on the harness first....thats the easiest. Then go to the ground.

kennzz05 07-02-2012 04:10 PM

Re: Fuse
 
wouldnt it be easier to just throw the stock incandesants back in to see if they work? if yes,fuse,wireing and relays are good


All times are GMT -5. The time now is 05:52 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community