Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f203/)
-   -   Windows stopped working (http://www.jeepgarage.org/f203/windows-stopped-working-42482.html)

nubian 05-23-2012 03:02 PM

Windows stopped working
 
My 02' GCJ Limited has a problem with all the windows not working except for the roof. Dealers and Auto shops say that the computer points to a bad front driver's door switch panel. I replaced said panel SEVERAL times so that's not the problem. Any ideas anyone?

Frango100 05-23-2012 03:12 PM

Re: Windows stopped working
 
I can presume that the fuse, F12, 50 A, in the Power Distribution Center under the hood, was the first thing which was checked?
You are sure that the passenger side windows won't work from the passengers side control switches?
Because the passengers side windows are controlled from the passengers door module.
There are some known problems of breaking wires in the rubber door boot, where the wiring passes from the body to the door.

nubian 05-23-2012 03:14 PM

Re: Windows stopped working
 
Yes, except for the roof all windows do not work even from their own switches on their respective doors.

Frango100 05-23-2012 03:17 PM

Re: Windows stopped working
 
And you are sure that the fuse is OK?
If so, you will have to start measuring to see if there is an open circuit. I can send a schematic later today.

nubian 05-23-2012 03:23 PM

Re: Windows stopped working
 
That would be great. Thank You

Frango100 05-24-2012 08:13 AM

Re: Windows stopped working
 
2 Attachment(s)
As you can see from the attached wiring schematic, both sides use the fuse 12, 50 A, for the power feeding. I would start measuring from the fuse 12 in the PDC to see if 12 V is available there from both sides of the fuse to ground. If ok, you could try on the door module connector C1 pin 1 for the 12 V. Let us know what you find.

nubian 05-24-2012 09:13 PM

Re: Windows stopped working
 
Quote:

Originally Posted by Frango100 (Post 634089)
As you can see from the attached wiring schematic, both sides use the fuse 12, 50 A, for the power feeding. I would start measuring from the fuse 12 in the PDC to see if 12 V is available there from both sides of the fuse to ground. If ok, you could try on the door module connector C1 pin 1 for the 12 V. Let us know what you find.

Thanks I will be able to check that next weekend as I my daughter is away with it at college.

nubian 06-06-2012 10:22 AM

Re: Windows stopped working
 
Got the Jeep back this past weekend, however not able to start troubleshooting yet. My daughter's 2007 Jeep Patriot 2.4L 5 spd has a P2004 engine code = intake manifold runner control (IMRC). I was test driving and checking out the engine before the check engine light came on. Have to get that out of the way so she can get it inspected.


All times are GMT -5. The time now is 03:45 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community