Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f203/)
-   -   Need help from anyone with a 4.7 related FSM (http://www.jeepgarage.org/f203/need-help-from-anyone-with-a-4-7-related-fsm-42826.html)

FlyinRyan 06-02-2012 03:36 AM

Need help from anyone with a 4.7 related FSM
 
This is not a WJ problem, or even a Jeep problem, but the answer I need can be most likely found in a WJ FSM. I need to know what the tolerances are in camshaft journal outer diameter. I may need to send out a set of 4.7 cams to be "fixed" for a customer, but need to know if I have any room for error.

Thanks in advance to anyone that can help.

Milous 06-02-2012 03:44 AM

Re: Need help from anyone with a 4.7 related FSM
 
2002 FSM:

4.7L CAMSHAFT
Bearing Journal Diameter 25.975 - 25.995 mm (1.0227 - 1.0235 in.)

FlyinRyan 06-02-2012 03:53 AM

Re: Need help from anyone with a 4.7 related FSM
 
That sure isn't much to work with, is it.


All times are GMT -5. The time now is 07:00 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community