Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f203/)
-   -   started re built motor. passenger head.clicking. went away and shut off.!!! (http://www.jeepgarage.org/f203/started-re-built-motor-passenger-head-clicking-went-away-and-shut-off-43151.html)

hoffmanestates 06-09-2012 09:53 AM

started re built motor. passenger head.clicking. went away and shut off.!!!
 
I posted on my 4.7 headgasket help and.I'm scared I f'ed my motor!!!!!

scjeep4.7HO 06-09-2012 06:21 PM

If you bent those two valves you'll have to pull the head and at a minimum replace those valves.

HTC Thunderbolt 2

hoffmanestates 06-09-2012 06:49 PM

torn apart already I must of been a tooth off. for chain..

Turbo charged G2X using tapatalk 2

scjeep4.7HO 06-09-2012 06:57 PM

It's not hard to do. I would make sure you pre lube before you crank it this time to ensure the timing chain hydraulic tensioners a chance to pump up and keep the timing chains tight.

HTC Thunderbolt 2

hoffmanestates 06-10-2012 12:10 AM

http://i672.photobucket.com/albums/v...609_171152.jpg
u can see imprint

http://i672.photobucket.com/albums/v...609_185534.jpg
pin is rounded. gear must of been not torqued to spec... dealer don't sell pin repair :mad:
Turbo charged G2X using tapatalk 2

hoffmanestates 06-12-2012 06:20 PM

should timing chain tensioners be pumps up already as it ran for 30sec-1 minute

Turbo charged G2X using tapatalk 2

scjeep4.7HO 06-12-2012 07:14 PM

they should be ok. That's mainly for fresh starts.

HTC Thunderbolt 2

hoffmanestates 06-13-2012 12:49 PM

1 Attachment(s)
so I dropped.head off at machine shop local and I talked to engine machinest and he told me of all he has seen wrong with the. anything. .7 litre motor Chrysler ever made.. Any who he has seen valve seats fall out .springs crack.rocker arms break or fall out. cams fail. and they have a high rate of electrolosis. when coolant isn't flushed

hoffmanestates 06-15-2012 06:10 PM

so found a dealer that might possibly have the pins.for.cam so will see tommorrow

Turbo charged G2X using tapatalk 2

Frango100 06-15-2012 07:45 PM

Re: started re built motor. passenger head.clicking. went away and shut off.!!!
 
The site i gave you for the dowel pin was not good?

hoffmanestates 06-15-2012 08:43 PM

oh shit i over looked it crap.....

Turbo charged G2X using tapatalk 2

hoffmanestates 06-18-2012 09:30 PM

I looked into pin and grainger sells them justvin a pack of 20. well machinest pulled out pin and might possibly have one. will see tomorrow as I left him the gear tomatch pin size...and the web link says it fits Dodge..I wonder if that's why I can't get one via Jeep specific .... hmmmm ill call Dodge tomorrow .....and as for findings mechanic to do my timing ya g.l. its either $300+ or guys wont touch a Chrysler motor

Turbo charged G2X using tapatalk 2


All times are GMT -5. The time now is 06:08 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community