06 Grand Cherokee Alpine PLV7, Memphis M3 and PR1000
This is my first/first install post so any comments to what im doing right/wrong is welcome.
Over the summer I'm gonna attempt to put in a PR1000 to power an alpine plv7 that i bought years ago (the PDX amp in it blew up) or 2 12" memphis M3s. Im gonna try to do this as cheaply as possible until i have enough money to change out the factory ratio. So basically...
Be able to keep the factory radio and stock speakers and add in a amp and be able to hot swap the subs.
What I have
2x 12" Memphis M3 in a ported box
Alpine PLV7 (blown amp, I believe)
Whats Needed/Need to figure out
Speaker Level to RCA Converter
4 Gauge Power Wiring
Resistance of the PLV subs/system for proper wring for the amp
Whats I really want to do
Gut the back seats, replace the backing with 2 shallow mount subs
Much more updates and pictures to come
|All times are GMT -5. The time now is 01:25 AM.|
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community