Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Liberty-KJ and KK (
-   -   Transmission codes (

kvman56 06-25-2012 04:13 PM

Transmission codes
I have a 2005 Liberty Limited, I am having trouble with the transmission, but not all the time. The check engine light came on, the code indicated a P0733 and P0700, anybody know what a P0733 could be?

bmbjr59 12-14-2015 05:34 PM

Re: Transmission codes
i have those as well,yet im able to go down the road till it warms up,when it does it drops down to low gear ,i will have it & reverse thats it been told my transmission is out, but i check some of the fuses in the engine box, found 1 blown ,dont know if thats the problem yet
there is been some other codes too,as i say dont know for sure whats going on with it yet

Frango100 12-14-2015 05:49 PM

Re: Transmission codes
The P0733 code means that there is an incorrect gear ratio in 3rd gear. That normally means a slipping clutch. (the transmission controller knows how the rpm ratio between input and output must be for each gear, so can easily detect a slipping clutch).
How does the fluid looks like? Level and smell/color? Too low fluid level can cause a low line pressure with a slipping clutch as a result. A too high fluid level can cause air being mixed in the fluid by the moving parts, with a low line pressure as well.
When the level is ok, but the fluid is black or smells burnt, then most probably a clutch is burnt and the transmission must be opened.

All times are GMT -5. The time now is 08:07 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community