Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Troubleshooting/Problems (
-   -   00 i6 codes P0352, p1391 (

hoffmanestates 07-06-2012 09:41 PM

00 i6 codes P0352, p1391
my cousin has a 00 i6 and been getting these lately but intermittently. the cel come on and go off 30min later.... wondering what you guys think.and where does he start.or look for

Turbo charged G2X using tapatalk 2

Frango100 07-07-2012 03:47 PM

Re: 00 i6 codes P0352, p1391
P0352 = ignition coil control circuit. Does the engine run rough when it happens?
Changing ignition coil normally doesn't help, can be cam or crank sensor related. I would clear the fault first and see if it returns.
P1391= intermittent loss of crankshaft or cam position sensor.
So probably cam or crankshaft sensor related problem.

Jf0235644 07-04-2016 07:20 PM

Re: 00 i6 codes P0352, p1391
I have a similar issue. Mine is a 01 GC Limited w/ 4.0. I have p0351 p0352 p0353. Wont go away. Replaced sensor at top of transmission housing. Crankshaft position sensor i think. It was a used one but, no change and the big ignition coil. Its hard to start but when it finally does it either stumbles or idles great. If you give it gas it revs up then sputters then no matter if u have your foot to the floor or not touching gas at all it bogs down and stalls. Just replaced the transmission too.

All times are GMT -5. The time now is 01:45 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community