Does anyone know if the Autoenginuity scanner will clear codes to take my grand cherokee out of permenant limb mode, when other cheaper scanners are losing communication the the TCM?
I have a 2007 WH CRD 3 ltr. It has gone into permenant limb mode with about 8 trouble codes.
I have replaced the battery, tested bad. Taken LED reverse lights out and put original back in.
Replaced the transfer case motor code c140A.
After repairing three of the faults I think its time to clear all codes and see what ones come back now.
Re: scanner Autoenginuity
Yes, it will clear all trouble codes with the CRD. I have it and works. The codes will come back if the problem isn't fixed. My transmission went into limp mode, I fixed the problem and cleared codes = all good.
|All times are GMT -5. The time now is 01:20 PM.|
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community