Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Flyin' Ryan Performance (
-   -   408 Stroker porting (

FlyinRyan 07-18-2012 11:54 PM

408 Stroker porting
A local customer of mine is putting the finishing details on his 408 stroker build in his Dakota. Brief rundown of the specs are as follows:

'00 RT Dakota
Built 46RE auto w/Martin Saine triple disc lockup converter (3800 or so rpm stall)
4.56 gears
10:1 CR
Ported EQ iron heads, big valves
BIG cam, 246/254 .610ish lift 114 LSA
Novi 2000 supercharger
One-off longtube headers- 2" primaries, ceramic coated
3.5" duals into Borla XR1s
4bbl M1 manifold
F&B 58mm TB

This setup made 540 hp on motor alone. It is, simply put, a no-bullsh!t build. The goal is approx 650whp.

The owner asked me to port-match his 4bbl to 2 bbl adapter to his 58mm TB. Below are pics, before, during, after.

FlyinRyan 07-19-2012 12:00 AM

Sent from my DROID BIONIC using Tapatalk 2

Scottina06 07-19-2012 12:13 AM

Re: 408 Stroker porting

All times are GMT -5. The time now is 03:45 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community