Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f203/)
-   -   P0150 (http://www.jeepgarage.org/f203/p0150-46412.html)

Jeep2004Cher 08-21-2012 08:03 PM

P0150
 
How do I go about replacing the sensor for code P0150?

Thank you,
JOe

Scottina06 08-21-2012 08:20 PM

Re: P0150
 
02 sensor circuit bank 2 sensor 1

Bank 1 refers to the side of the engine that has the #1 cylinder. Bank 2 is the opposite side of the engine.

Frango100 08-22-2012 06:08 AM

Re: P0150
 
To clarify more, bank 1 is the left cylinder row, seen from the drivers seat, consequently bank 2 is the right cylinder row, seen from the drivers seat.
Sensor 1 is the upstream sensor, ie the one closest to the engine exhaust manifold, and sensor 2 is the downstream sensor.
So in your case the bank 2 sensor closest to the exhaust manifold is the problem. Have a look at the wiring first, sometimes a connector could get loose or have a bad contact due to corrosion or dirt or a wire shaved through or is touching an exhaust part, which could have melted the wire insulation.


All times are GMT -5. The time now is 12:14 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community