Transmission shifting from reverse to drive
My 2007 3.0 CRD GC, 140 000km, transmission sometimes does not shift after changing from reverse to drive.
If I reverse out of, say, a parking and change to 'Drive' the transmission seems to stay in first gear. On the instruments all the gears are highlighted and it does not change. If I then shift down or up manually it goes back to normal.
I am going to start by flushing and changing the transmission fluid.
Any advice would be appreciated
Re: Transmission shifting from reverse to drive
I would find out if you have any TCM codes and go from there. The only time my I had this problem my transmission went into limp mode and would not shift out of 2nd gear. You are not having this problem, but something is causing a problem it could be an electrical problem to a solenoid.
|All times are GMT -5. The time now is 01:10 AM.|
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community