Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Interior/Exterior/Visual/Lighting (
-   -   Debadge Help (

jeep0714 09-03-2012 11:17 PM

Debadge Help
I debadged the Jeep Logo on the front and the back a few months ago. The front looks fine however the back is still showing the letters of JEEP on it when you are close and its really annoying. It looks like there is still something there but it is completely flat and nothing is there however there is like a substance looking thing in some of the areas like sticky residue but when you touch it there is nothing there. Does anyone know how to get it to all look the same? And ways would be good? Please Help.

Juan 09-04-2012 02:52 AM

I used a product called glue gone. You should be able to pick it up at most auto shops. Have you tried using it yet?

CreeperJeeper 09-04-2012 05:29 AM


Originally Posted by Juan (Post 678918)
I used a product called glue gone. You should be able to pick it up at most auto shops. Have you tried using it yet?

I think you mean Goo Gone.

Sent from my iPhone using Tapatalk

DAVY27 09-04-2012 08:15 AM

Re: Debadge Help
goo gone works for me. maybe u have to buff it a bit with a polish and wax

*BabyGirlJJ* 09-04-2012 08:26 AM

Re: Debadge Help
I agree with the fellas above! Goo Gone worked on both black Jeeps that we have debadged! :)

t-pain 09-04-2012 08:28 AM

1st: WD-40 on a micro fibre cloth or bare fingers to remove any glue/residue.

2nd: Mcgwuiar's Scratch X 2.0 polish with terry cloth towel to get rid of the outline, any scuffing and paint fade.

That's what I used on my '10 after I removed the badging.

Sent from my iPhone using Tapatalk

Rob07WK 09-07-2012 01:27 PM

Re: Debadge Help
you'll need a mildly abrasive polish

Madanio24 09-07-2012 06:58 PM

Re: Debadge Help
After removing my badges there was a ghost of where the badges used to be. Got bug and tar remover then buffed and waxed and completely gone.

Theogriff15 09-07-2012 08:58 PM

Re: Debadge Help
I heated my badges off with a heat gun on the low setting. Once they were off I took a hair dryer and while aiming the heat at the area where the badges were, applied a very, VERY, VERY, small amount of paint thinner via a wash cloth. This took everything off immediately. Be careful tho, if you use too much paint thinner or heat that spot up too much the paint will come off.

Madanio24 09-08-2012 08:29 PM

Re: Debadge Help
Wow. Ive seen some bad debadges that way when people used too much. Glad it worked out for you though.

Mongoose9400 09-08-2012 10:19 PM

Ice them down, freeze them, and pop them off.

Sent from my iPhone 4S

jeep0714 09-08-2012 11:47 PM

Re: Debadge Help
There isnt any actual glue or sticky stuff
Its just like a ghost of the letters

All times are GMT -5. The time now is 11:08 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community