Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f181/)
-   -   abs, esp and traction light on after pinch weld mod (http://www.jeepgarage.org/f181/abs-esp-and-traction-light-on-after-pinch-weld-mod-47201.html)

SURF1465 09-08-2012 11:46 AM

abs, esp and traction light on after pinch weld mod
 
After doing the pinch weld mod on the left side the ESP/BAS, ABS, and Traction lights are on. Started jeep to turn it around in garage to do the other side and found the lights on. The only electrical item moved was the tpms receiver on left frt.
Codes uo125, uo415 in memory. After clearing codes they come right back on.
i'm stuck on what to do.

2 days ago I tuned it with a superchips flashpaq. I returned it back to stock, but the lights are still on.

2007 WK 5.7l QDII

Scottina06 09-08-2012 12:29 PM

Re: abs, esp and traction light on after pinch weld mod
 
you may have damaged one of the abs sensors on the hub or in the femder liner.

SURF1465 09-08-2012 12:59 PM

Re: abs, esp and traction light on after pinch weld mod
 
Is there another sensor in the fender wheel?
Only one I see is mounted to the hub and the connector is near the plastic fender well.
I may have bumped that connector moving the fender well. The codes do not indicate front or rear?

Scottina06 09-08-2012 01:00 PM

Re: abs, esp and traction light on after pinch weld mod
 
let me look at the codes

Scottina06 09-08-2012 01:05 PM

Re: abs, esp and traction light on after pinch weld mod
 
you need to get those codes again...those are not correct

SURF1465 09-08-2012 01:46 PM

Re: abs, esp and traction light on after pinch weld mod
 
I checked the codes again using the superchips programmer and it shows codes U0415 and U0125. I can't find anything in the service manual.

Code U0415 - lost communication with the dynamics sensor
U0125 - implausible data from ABS

It may be just dumb luck that the lights came on the same time I started the mod.

Valpacer 09-08-2012 05:05 PM

Re: abs, esp and traction light on after pinch weld mod
 
As Scott said, probably a wheel speed sensor or connector!

SURF1465 09-11-2012 07:44 PM

Re: abs, esp and traction light on after pinch weld mod
 
scanner the system with a Snap On Modis.
Same codes. and wont clear.
any thoughts

Stickerbombed 09-11-2012 09:51 PM

Re: abs, esp and traction light on after pinch weld mod
 
Same thoughts as before...change the WSS and see if it fixes it

SURF1465 09-12-2012 05:19 AM

Re: abs, esp and traction light on after pinch weld mod
 
which one?

Madanio24 09-13-2012 08:32 AM

Re: abs, esp and traction light on after pinch weld mod
 
This happened to me it was a speed sensor in the hub

SURF1465 09-14-2012 09:58 PM

Re: abs, esp and traction light on after pinch weld mod
 
codes do not relate to speed sensor.


All times are GMT -5. The time now is 07:24 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community