Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Showoff (http://www.jeepgarage.org/f83/)
-   -   New engine and "intake system" (http://www.jeepgarage.org/f83/new-engine-and-intake-system-47308.html)

muellge 09-11-2012 05:35 AM

New engine and "intake system"
 
I've enjoyed the techco twin screw for a while. Solid 10 second jeep in full trim, great instant acceleration, but I've been accumulating some parts for a while, about to get to work making them work now.


Casting sig for...
http://i889.photobucket.com/albums/a...6-13163840.jpg

a alum new block, still in the wrapper
http://i889.photobucket.com/albums/a...structions.jpg
block upskirt, nice mains...
http://i889.photobucket.com/albums/a...e-maincaps.jpg

Carillo rods
http://i889.photobucket.com/albums/a...oHBeamRods.jpg

that will connect to Ross pistons
http://i889.photobucket.com/albums/a...ld/pistons.jpg

one ring to squeeze them all...
http://i889.photobucket.com/albums/a...or4185bore.jpg

new jeep fuel hat from Fixer Dave Sawin - triple 340s, billet basket set up for a-n fittings -10 out and -6 in.
http://i889.photobucket.com/albums/a...d/DSC06435.jpg

high tech fuel squirters from ID
http://i889.photobucket.com/albums/a...oxcontents.jpg

Intermission - Tech tip - If anyone was curious about the rocker bones/head straps part numbers - 6.1 vs apache, they really are a little different...
http://i889.photobucket.com/albums/a.../DSC064871.jpg
Speaking of heads, Ronnie Crawford is completing the port job on some Apache heads now, with Ferrera 8mm whizbang valves to be backcut and angled, PAC 1555 springs, Victory 10 deg Ti retainers and single groove keepers and guides of suitable spec. I was lucky enough to get him to hand finish a set for me while he was doing Buckwheat's. Sorry no pics yet., well, maybe one or two...

intake port
http://i889.photobucket.com/albums/a...intakeport.jpg

exhaust port
http://i889.photobucket.com/albums/a...xhaustport.jpg

chamber clean up
http://i889.photobucket.com/albums/a...bercleanup.jpg

Eddie Gregory and Billy Drakeford at SHR will be putting my block together - machining it in house this week, block is already next door getting fitted for machining.
The Techco twin screw should really like a new 4.18x bore block and ported apache heads.
Will also get an updated SHR War Viking transmission while the block is being switched.





Then again, maybe I could change the lungs, while the engine's out and all...

Cool gadget, but what's it for.....
http://i889.photobucket.com/albums/a...d/ams-1000.jpg

To control all of this...
http://i889.photobucket.com/albums/a...d/turbokit.jpg
Twin Turbo Creations 67/66 ball bearing billet ball buster balls out Jeep turbo kit.
Coated image...
http://i889.photobucket.com/albums/a...20Build/m4.jpg
This kit is performing very well on some other builds, well designed, well sized, well balanced, best clamps. Chris is a great vendor.


Gonna need a new intake manifold...


So Ronnie Crawford also ported and machined a beer keg intake to accept a 90mm...
http://i889.photobucket.com/albums/a...d/DSC06188.jpg
and smoothed the runners and bosses so the air will flow....
http://i889.photobucket.com/albums/a...byeinjboss.jpg

Can't have cold turbos..., Chris, the coating done yet?
http://i889.photobucket.com/albums/a...d/DSC05669.jpg

and I guess I'll need a new badge...
http://i889.photobucket.com/albums/a...ld/TTBadge.jpg
Probably need a Techco for sale thread, too.

So there's the grocery list. Been quietly accumulating for months, which has in itself been lots of fun, especially with all the new turbo builds popping up out there. Have just about everything. Once heads are completed and delivered, a turbo cam of suitable spec will be designed by Eddie and Billy in collaboration with Cammotion, who just happens to have some of Crawford's better turbo cams on file to start with. Not going in the shop just yet, first will be heading up the highway a bit to Jason Wood of Wizard Racing for some safety. Maybe its all done in time to make FL in January 2013.

Scottina06 09-11-2012 09:07 AM

Re: New engine and "intake system"
 
WOW....epic thread George! Impressive

stashgto 09-11-2012 09:46 AM

Re: New engine and "intake system"
 
You better add a ball strap to your list of safety gear!

jrjeep 09-11-2012 01:03 PM

Re: New engine and "intake system"
 
wow...

viking757 09-11-2012 09:24 PM

Re: New engine and "intake system"
 
That's going to be nuts!

stashgto 09-11-2012 09:35 PM

Re: New engine and "intake system"
 
Thanks

La-Bestia 09-12-2012 09:36 AM

Re: New engine and "intake system"
 
dayyyyummmmm!!!!!!

robpp 09-12-2012 03:56 PM

Re: New engine and "intake system"
 
all i have to say is WOWOWOWOW


cant wait to see some more details george.......you been a busy shoppER!

*sox* 09-12-2012 03:59 PM

Re: New engine and "intake system"
 
Wow!

Cant wait to see more.

ernestd 09-12-2012 07:13 PM

Re: New engine and "intake system"
 
Great job Buddy.
Looking forward to seeing the finished product.
Enjoy the build!

muellge 10-06-2012 09:45 AM

Re: New engine and "intake system"
 
The bore and hone is done. So is the balance on the crank. Jeep is getting some interior pipes this week. Still waiting for heads to get flowed so we can make a cam....

SvenskaJeepGuy 10-06-2012 06:35 PM

Re: New engine and "intake system"
 
wow!


All times are GMT -5. The time now is 11:27 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community