Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f203/)
-   -   These guys for blender door fix kit ? (http://www.jeepgarage.org/f203/these-guys-for-blender-door-fix-kit-47619.html)

GCUK 09-18-2012 08:39 AM

These guys for blender door fix kit ?
 
http://www.jgcparts.com/JGCParts_Jee...rnational.html

Product and Install seems well explained.
Anyone used this product ?
Is there any other alternitive on the market ?

Dont think mine will last out too much longer. I have all the error codes and have to constantly turn the heat up/down to get the doors to reset.

Thanks

01grand 09-18-2012 08:41 AM

Re: These guys for blender door fix kit ?
 
Looks right to me! Are you looking to do the single zone or dual zone repair?

GCUK 09-18-2012 09:50 AM

Re: These guys for blender door fix kit ?
 
Ive got 2 temp controlers on the dash so I'll assume its dual zone system !

Offroadcowboy 09-18-2012 11:01 AM

Re: These guys for blender door fix kit ?
 
I bought the Mopar Kit for RHD around 100 for my 2001 (Now sold), the kit had uprated flaps and drives. Had the Jeep 12 months before I sold it. Took around 1 Hour to do.

redbluff 09-20-2012 12:19 AM

Re: These guys for blender door fix kit ?
 
Quote:

Originally Posted by GCUK (Post 685083)
Ive got 2 temp controlers on the dash so I'll assume its dual zone system !

Here's the other seller.
http://blendorstore.com/
I used his kit on my 99. It's a pretty easy fix.....unless you plan on removing the entire dash.

4.7ho 09-20-2012 08:21 PM

Re: These guys for blender door fix kit ?
 
Quote:

Originally Posted by redbluff (Post 686018)
Here's the other seller.
http://blendorstore.com/
I used his kit on my 99. It's a pretty easy fix.....unless you plan on removing the entire dash.

+1 for these doors. They are made from aircraft grade aluminum and can withstand more force than the actuators are able to produce. I did the dash removal method which honestly is not hard at all and replaced the evaporator coil, heater core, both blend doors and the recirc door while I was in there. All in all it took about a day and that was with taking it to the dealer to have them recharge the system. On a side note I had them installed on my WJ for a total of around 70,000 miles until I traded it and never had a single issue with my HVAC the entire time plus no more creaking from behind the dash as they moved and that's with using it everyday here in Florida.

Here is a link that was invaluable to me when I did mine. http://www.wjjeeps.com/hvac_sub_assembly.htm

mantonas 10-23-2013 08:51 PM

Re: These guys for blender door fix kit ?
 
I tried to follow the wjjeeps.com link and the pictures wouldn't load. Is there another website that contains this information?

Gus9890 11-04-2013 02:55 PM

Re: These guys for blender door fix kit ?
 
Looks right


All times are GMT -5. The time now is 09:31 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community