Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Trouble Shooting/Problems/Service (http://www.jeepgarage.org/f107/)
-   -   Quadra Drive/Lift Module (http://www.jeepgarage.org/f107/quadra-drive-lift-module-48429.html)

James Cole 10-05-2012 09:25 PM

Quadra Drive/Lift Module
 
Hello Guys...


I accidentaly spilled some soda over the quadra drive/lift module in front of the armrest... It works fine only that sometimes the buttons stick.... is there any way I can remove the module to clean it completely?

Let me know and thank you!

JC

JTS97Z28 10-05-2012 11:02 PM

Re: Quadra Drive/Lift Module
 
Just lift the center console lid and lift the silver center bezel up and out. Then you can access the clips/screws that hold the quadra drive control switches in place.
It's super easy to remove the center bezel. Oh I almost forgot the shift knob needs to come off to get that panel out. All you do is pry the chrome trim ring down then the shift knob comes right off. Just be careful not to scratch or damage anything.

James Cole 10-08-2012 09:49 AM

Re: Quadra Drive/Lift Module
 
JT thanks for your response... how do I lift the center bezel? does it just pop out? any locations where you recommend prying with a flat screwdriver?


All times are GMT -5. The time now is 07:26 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community