Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems (http://www.jeepgarage.org/f203/)
-   -   Check Gauges Light (http://www.jeepgarage.org/f203/check-gauges-light-48825.html)

1Redempt1 10-14-2012 11:26 AM

Check Gauges Light
 
My Jeep Grand Cherokee Laredo won't start, the check gauges light is on, and all the gauges are down. What is wrong?

Frango100 10-14-2012 01:57 PM

Re: Check Gauges Light
 
Check gauges light should be on when any of the 4 indicators is out of normal operating range. The instrument panel gets its input for batt voltage, fuel level, oil pressure and coolant temp from the PCM. Could be a fuse blown from the PCM, so check that first. When all ok, check for any fault code set using the key dance ( ignition switch off/on 3 times and leave it in on at the third time. The odometer will show " DONE" when all ok, or fault code(s).


All times are GMT -5. The time now is 02:15 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community