Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Grand Cherokee - WJ (
-   -   Thermostat Bolt size (

Doug4230 10-22-2012 05:56 PM

Thermostat Bolt size
REALLY BAD DAY. Went to change the oil sending unit as part of some other work including a front driveshaft CV replacement and a chemical fix (I hope) for a head gasket leak.
Oil sender body sheared off with almost NO effort. After dismanteling most of the front end just to be able to see the problem, I managed to remove it with an easy-out (drilled one size larger so as not to break the one that fit and create an even bigger problem).
Unfortunately, in the confusion of too many jobs on a grass lawn, I managed to lose the bolts to the thremostat housing that I had pulled the night before. Now I do not know what size and length bolts I need.
Anyone out there have a quick answer?

JeepFreak12 10-23-2012 05:08 PM

Re: Thermostat Bolt size
1 Attachment(s)
1 and a 1/4 inches long and 1/4 inch diameter with a 1mm fine thread. Hope that helps man

jeep0086 11-08-2012 02:22 PM

Re: Thermostat Bolt size
they are acually 6mm x1.0 pitch bolts. good luck, just replaced mine lol

All times are GMT -5. The time now is 07:32 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community