Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Interior/Exterior/Visual (http://www.jeepgarage.org/f176/)
-   -   12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play (http://www.jeepgarage.org/f176/12-pin-plug-to-make-oem-bi-xenon-retrofit-more-plug-and-play-49595.html)

Jeep_addicted 10-29-2012 10:44 PM

12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
Laredo, Altitude, Trailhawk and Durango owners who want to add OEM bi-xenon headlights only to find that there is not a factory connector for the passenger side headlight we can now power both headlights with the factory ballasts.

The benefits of this is that you don't have to modify the headlights in any way so if you have a lease and you have to turn it back in you can sell of the OEM untouched headlight.

Molex Actually makes an Automotive grade 12 position female connector that properly seats onto the OEM housing male connection.

Here is the link to the part where I found it: 33472-1206 Molex | Mouser

Here is th link to the several different pin size option: 33012 | Mouser Electronics, Inc.

Here is the expoded view of the part. http://www.molex.com/pdm_docs/sd/334721206_sd.pdf


Compatible with :

WK2
WD
LX
Possibly other MOPAR cars that use the same connector.

Note :The connector is sold without the female pins

The Pins are sold separatley and you can choose what gauge of wire that suits your project. I bought the 14/16 AWG sized pins for my project.

Here are some actual close up pictures of the actual part.

http://img.photobucket.com/albums/v5...12position.jpg

http://img.photobucket.com/albums/v5...3012female.jpg

http://img.photobucket.com/albums/v5...nishedpins.jpg

http://img.photobucket.com/albums/v5.../Molexback.jpg

http://img.photobucket.com/albums/v5...I/Molextop.jpg

http://img.photobucket.com/albums/v5.../Molexleft.jpg

http://img.photobucket.com/albums/v5...Molexright.jpg

http://img.photobucket.com/albums/v5.../Snappedin.jpg

Here are two places online that you can get these connectors. I have a few on hand and you can PM me if you want me to assemble one for you if you want to one stop shop.

www.mouser.com

33472-1206 MOLEX / WALDOM | Discrete Wire Housing Connectors 33472 1206 | Onlinecomponents.com

Scottina06 10-30-2012 05:24 AM

Nice find!

bclemons 10-30-2012 07:35 AM

Re: 12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
What connector did you use for the driver's side?
Great find thanks for information.

Scottina06 10-30-2012 07:57 AM

Mopar sells the connector and harness for the drivers side. It's part# is in my how to thread

Jeep_addicted 10-30-2012 08:05 AM

Re: 12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
I could not find an equivalent connector to the OEM on the driverside so I had to order the Mopar wiring repair kit which to me is overpriced but is your best bet when doing the swap.

Scott can you make this a sticky

bclemons 10-30-2012 03:45 PM

Re: 12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
Thanks,
Great information to keep. We should compile everything together so it's easy to find.

primosx95 02-04-2013 08:05 PM

Re: 12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
on the passenger side, you recommend using the 12 pin plug, do you still have to use the canbus fix or just replace current plug with this one

Jeep_addicted 02-04-2013 10:11 PM

Re: 12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
Primo PM sent

Luigi71 03-18-2013 05:49 PM

Re: 12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
Hi,

I would like to know if you can help me, I had bought a 2012 Jeep Grand Cherokee Laredo with out the xeon light system, now I bouth the complete head lamp assembly with the xeon light but I having problems with the wire conections from the car to the PLUGS that are different in the new head lamp assembly, could you send me more information to my e-mail: iannul@yahoo.com that could help me to buy the right thing to adapt to the wire conections.

Jeep_addicted 03-18-2013 08:45 PM

Re: 12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
Quote:

Originally Posted by Luigi71 (Post 782973)
Hi,

I would like to know if you can help me, I had bought a 2012 Jeep Grand Cherokee Laredo with out the xeon light system, now I bouth the complete head lamp assembly with the xeon light but I having problems with the wire conections from the car to the PLUGS that are different in the new head lamp assembly, could you send me more information to my e-mail: iannul@yahoo.com that could help me to buy the right thing to adapt to the wire conections.

I emailed you

Cherokee8ball 02-19-2014 09:15 PM

Re: 12 Pin plug to make OEM bi Xenon Retrofit more PLUG & Play
 
My Wk2 Silver Trailhawk is around the corner at a hotel because the shipping co forgot the keys (my luck). Anyhow, I already purchased/received my OEM projector lights and am ready to do this conversion from the crappy urine colored headlights to headlights that cars in 2014 should all have.

Jeep_Addicted...I may be interested in purchasing a harness depending on the price and the arrival time. Could you PM me (it won't let me PM you yet) with the pricing? Thanks...this is good stuff.

Colby 02-19-2014 09:33 PM

Quote:

Originally Posted by Scottina06 (Post 704605)
Mopar sells the connector and harness for the drivers side. It's part# is in my how to thread

hey Scott do you have any info on if anyone has found out how to get the 2014 day time running lights working for the models that don't have it


All times are GMT -5. The time now is 07:13 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community