Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Suspension/Brakes/Wheels/Tires (http://www.jeepgarage.org/f185/)
-   -   Rear shocks torque specs??? (http://www.jeepgarage.org/f185/rear-shocks-torque-specs-50335.html)

goflick 11-15-2012 04:02 PM

Rear shocks torque specs???
 
Just put a set of Bilsteins on my 05 WK and I am getting a rattle front the rear passengers shock and am thinking it needs to be a little tighter. Does anyone have the torque specs for it?

Interprise 11-15-2012 06:22 PM

02 - Front Suspension/Front/Specifications
SPECIFICATIONS

DESCRIPTION Nm Ft. Lbs. In. Lbs.
Shock Absorber Upper Nuts 95 70 -
Shock Absorber Clevis Bracket 122 90 -
Shock upper Mounting Nut 39 25 -
Clevis Bracket to Lower Control Arm 169 125 -
Upper Control Arm Bolt/Nut to Body 108 80 -
Lower Control Arm Bolt
Rear Pivot 88 65 -
Lower Control Arm Bolt/Nut
Front Pivot 169 125 -
Upper Ball Joint Nut 95 70 -
Lower Ball Joint Nut 95 70 -
Stabilizer Bar Retainer Bolts 129 95 -
Stabilizer Bar Link Upper Nut 108 80 -
Stabilizer Bar Link Lower Bolt 115 85 -
Half Shaft to Hub/Bearing Nut 135 100 -
Hub Bearing Knuckle Bolts 115 85 -

Rear Suspension/Specifications
TORQUE

DESCRIPTION Nm Ft. Lbs. In. Lbs.
Shock Absorber Upper Bolt/Nut 95 70 —
Shock Absorber Lower Bolt/Nut 115 85 —
Suspension Arms Lower Axle Bracket Nut 210 155 —
Suspension Arms Lower Frame Bracket Nut 176 130 —
Suspension Arms Upper Axle Bracket Nut 136 100 —
Suspension Arms Upper Frame Bracket Nut 129 95 —
Track Bar to Axle 190 140 —
Track Bar to Rear Structure 190 140 —
Stabilizer Bar Retainer Bolts 42 31 —
Stabilizer Link Nut to Stabilizer Bar 88 65 —
Stabilizer Link to Body Bolt 102 75 —
Stabilizer Link to Bracket Bolt SRT8 102 75 —
Stabilizer Link Bracket Bolt/Nut To Frame SRT8 129 95 —
Jounce Bumper Bolt to Body 54 40 —

bobharly 11-25-2012 12:59 AM

Re: Rear shocks torque specs???
 
Can you confirm that ft lbs specs for stablizer link nut to stabilizer bar? My Haynes manual shows 90 ft lbs, but I can't seem to get it that tight. 65 ft lbs makes more sense...

I kept breaking torx bits trying to get to 90. Finally gave up. What is your source for this info?

Milous 11-25-2012 04:04 AM

Re: Rear shocks torque specs???
 
1 Attachment(s)
Quote:

Originally Posted by bobharly (Post 715014)
Can you confirm that ft lbs specs for stablizer link nut to stabilizer bar? My Haynes manual shows 90 ft lbs, but I can't seem to get it that tight. 65 ft lbs makes more sense...

I kept breaking torx bits trying to get to 90. Finally gave up. What is your source for this info?

65 ft. lbs. is correct. See attached page from FSM.

bobharly 11-25-2012 11:25 PM

Re: Rear shocks torque specs???
 
2 Attachment(s)
What is "FSM"? Sorry, acronyms just kill me.

I was using a scanned page (supposed to be a shop manual I believe) found in the "sticky" thread for suspension. All the numbers match yours except for the link nut. Furthermore, my haynes manual had the same specs as this one. But when I did the install, everytime I got close to 70 lbs (I was trying to go up incrementally because it was so stubborn) I'd snap my torx T-40 in half!!! I assumed I need better tools and order new torx bits (haven't arrived yet). But if the correct torque is 65 lbs, I'm already there. This is a serious misprint if this is true because it is reappearing in other manuals.

Thanks for the post, this will benefit many members who are DIYer's!

BTW, can you check out my copy of the front suspension specs? Let us know if there are any other conflicts.

Milous 11-26-2012 03:07 AM

Re: Rear shocks torque specs???
 
Quote:

Originally Posted by bobharly (Post 715303)
What is "FSM"? Sorry, acronyms just kill me.

Factory Service Manual, official manual from Jeep. I also checked other WK model year FSM's, all show 65 ft. lbs.

bobharly 11-26-2012 03:30 AM

Re: Rear shocks torque specs???
 
This is my source for the bad specs. It was a post on the sticky suspension thread, back in march 2010. I wonder if the online service manual was FSM approved? My Haynes manual also had those specs...? Thanks for confirming that. I assume your FSM is an online manual? The format does not look like an old book scan.

Once again, thanks!

Quote:

Originally Posted by 06HemiLtd (Post 164801)
here are some more torque numbers for the front and rear suspension parts. i ordered an online service manual 2 years ago. it's over 9000 pages so i thought i'd share.

]


Milous 11-26-2012 03:58 AM

Re: Rear shocks torque specs???
 
There are constant changes/corrections/additions to the online manuals, so that is always the best reference when available. Paper/disc manuals can get outdated quickly. BTW, I updated the PDF attachment in post # 4 to include both front and rear suspension torque numbers.


All times are GMT -5. The time now is 10:01 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community