Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Technical Tips/DIY/How-To (http://www.jeepgarage.org/f187/)
-   -   How To : Install A Ported TB (http://www.jeepgarage.org/f187/how-to-install-a-ported-tb-5237.html)

Frankie 01-02-2010 08:17 PM

How To : Install A Ported TB
 
Here is what I did and how I did it...You can obviously do it however you want as this is only how I did it and should be only used as a guide!


Parts Used:

Flyin Ryan (FR) Ported TB


Tools Used:

Ratchet and Socket


Ok, Lets get started...

First locate your TB...Easy enough!

http://img689.imageshack.us/img689/1084/dsc03333j.jpg

Close up!

http://img109.imageshack.us/img109/1458/dsc03332c.jpg

Unplug the connector!

http://img63.imageshack.us/img63/3766/dsc03335w.jpg

Pull away the wire and tuck around back!

http://img691.imageshack.us/img691/9858/dsc03336d.jpg

Detach the intake!

http://img63.imageshack.us/img63/3398/dsc03339.jpg

Remove the intake so you have easy access to the TB!

http://img43.imageshack.us/img43/7388/dsc03341t.jpg

Remove the 4 bolts and pull off the TB!

Here is a pic of the 2 for comparison...FR TB on the left, OEM TB on the right!

http://img691.imageshack.us/img691/5747/dsc03342o.jpg

Put the ported TB on and screw the 4 bolts back in!

http://img691.imageshack.us/img691/8466/dsc03346d.jpg

Attach the intake!

http://img710.imageshack.us/img710/4244/dsc03338.jpg

Attach the connector to the TB!

http://img710.imageshack.us/img710/4155/dsc03334z.jpg


That was it...Piece of cake!

Total time was 10min or so!



Like always this is just how I did it...I take no responsibility for you!

robpp 01-02-2010 10:32 PM

Re: How To : Install A Ported TB
 
just an fyi, for the 4.7 WK guys, I had quite a few more pieces to swap from the tb's.

not sure if its a 4.7 thing or the fact that I used a new TB that was 'stripped' so i had to transfer a lot more parts.

DJ BoNiOmArIo 01-02-2010 10:48 PM

Re: How To : Install A Ported TB
 
great write up Frankie, seems easy :)

Frankie 01-02-2010 10:49 PM

Re: How To : Install A Ported TB
 
Quote:

Originally Posted by boniomario (Post 124842)
great write up Frankie, seems easy :)

Thanks...It was SUPER easy! :cool:

iJeep 01-02-2010 10:53 PM

Re: How To : Install A Ported TB
 
Yeah that was great dude... If I had a 5.7.. LOL J/K

BillsHoe 01-03-2010 08:19 PM

Re: How To : Install A Ported TB
 
Frankie any noticeable difference

B.P.O.D 01-04-2010 11:49 AM

Re: How To : Install A Ported TB
 
results?

Frankie 01-04-2010 11:58 AM

Re: How To : Install A Ported TB
 
Quote:

Originally Posted by BillsHoe (Post 125170)
Frankie any noticeable difference

Quote:

Originally Posted by B.P.O.D (Post 125397)
results?

Since the Jeep was in the shop, I really havent had any chance to test it out that much! In a week or so I will start a new thread with the results! :cool:

FlyinRyan 01-05-2010 11:37 AM

Re: How To : Install A Ported TB
 
Quote:

Originally Posted by robpp (Post 124831)
just an fyi, for the 4.7 WK guys, I had quite a few more pieces to swap from the tb's.

not sure if its a 4.7 thing or the fact that I used a new TB that was 'stripped' so i had to transfer a lot more parts.


Excellent point. The Hemi TB only has the 1 connector, while the 4.7 (it is not WK specific, it is a 4.7 thing) has several. IAC, TPS, vacuum, etc etc....it's a busy piece :lol:

For those who don't know this is for a 5.7. Installs for 3.7s and 4.7s are different. They will be similiar in the steps but the TBs are in different locations, have different sensors, etc.

BenReardon 01-05-2010 01:16 PM

Re: How To : Install A Ported TB
 
Looks great, and easy, cant wait to hear about results

Megatron 01-05-2010 01:45 PM

Re: How To : Install A Ported TB
 
so easy even ezy can do it.

too bad ezy has no hemi.

LOL.

Chuck 01-05-2010 02:25 PM

Re: How To : Install A Ported TB
 
Nice writeup, I would make a writeup for the 4.0 but its extremely basic (although removing 3 sensors are a pain in the arse :lol:). Maybe I will make one :confused:


All times are GMT -5. The time now is 11:24 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community