Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Interior/Exterior/Visual (http://www.jeepgarage.org/f182/)
-   -   Part # for Female Plug - SRT8 rear fogs (http://www.jeepgarage.org/f182/part-for-female-plug-srt8-rear-fogs-53211.html)

therock2 01-18-2013 10:38 PM

Part # for Female Plug - SRT8 rear fogs
 
I am in the process of building my own wiring harness for the SRT8 rear fog lamps but I am having trouble finding the correct Delphi part number for the female plug that goes into the lamp socket. If anyone has constructed their own wiring harness and knows which female plug fits it I would appreciate the info.

Thanks in advance.

http://i1180.photobucket.com/albums/...A1A01A3411.jpg

http://i1180.photobucket.com/albums/...A2049022DE.jpg

http://i1180.photobucket.com/albums/...A1B376DF30.jpg

therock2 01-18-2013 10:52 PM

Re: Part # for Female Plug - SRT8 rear fogs
 
I think I'm getting close. Just need a part # confirmation since I don't have one to try in the socket.

http://i1180.photobucket.com/albums/...psbd09f1f5.jpg

ItsAJeepThing 01-18-2013 11:13 PM

Re: Part # for Female Plug - SRT8 rear fogs
 
Interesting. I would like to know the part # for that as well. Wouldnt mind making my own harness.

antsjeep 01-27-2013 09:55 AM

Re: Part # for Female Plug - SRT8 rear fogs
 
Tail light solutions sell complete harnesses for rear fog conversions on all SRT8 WK's. They MIGHT be willing to sell just that plug. Guys name is Ken.

http://taillight.xglobal.net/wk1_gc_parts.htm

**EDIT** here is a pic of the actual plug they use for the rear fog harness BUT FOR '07-'10**


http://i47.tinypic.com/290revp.png

therock2 01-27-2013 11:18 AM

Re: Part # for Female Plug - SRT8 rear fogs
 
That's the plug I'm looking for! Any other photos of the end of it you can post? I need to see the shape of the end of the plug that goes into the lamp socket.
I have a great source for connector plugs.
Thanks.

antsjeep 01-27-2013 03:32 PM

Re: Part # for Female Plug - SRT8 rear fogs
 
you'd have to look on their website under the install guides (PDF) and it will show a few more pics of that plug.

therock2 01-28-2013 05:43 PM

Re: Part # for Female Plug - SRT8 rear fogs
 
I'm getting closer to finding the correct plug thanks to the help from antsjeep.
It may be this plug. I'm going to order a couple to try out. I'll let you know.

MPS150-2F
http://i1180.photobucket.com/albums/...111710C295.jpg

Verdade 02-18-2013 12:03 AM

Re: Part # for Female Plug - SRT8 rear fogs
 
Did you try them? How is the fit?


-

kennzz05 02-18-2013 12:17 AM

Re: Part # for Female Plug - SRT8 rear fogs
 
i know this sounds tacky but couldnt you just solder wires on the end of those pins and make youre own plugs with some type of more common plugs and seal up youre solder work with heatshrink

therock2 02-18-2013 10:31 AM

Re: Part # for Female Plug - SRT8 rear fogs
 
Update. The second plug (gray and black) MPS150-2F is the correct plug. Snaps right on with a nice tight seal. The only problem is that there isn't a metal connector inside that makes contact with the metal pin inside the socket. I may just enlarge the hole at the end of the connector and pass the two wires through and solder the ends on to the pins and then slide the plug back into the socket. The biggest issue with the rear fog lamps that I've read is with water getting into the socket and corroding the whole assembly. At least with this sealed plug I can be assured that water won't get in (or as easily). I can then seal up the ends where the wires enter the plug with some silicone sealant for extra protection.

kennzz05, this is more along the lines of your idea. I'll be putting it all together in the next week or two so I'll keep you informed. I'm figuring about $25 in parts by the time I'm done.

Diboblo 02-26-2013 11:41 PM

Re: Part # for Female Plug - SRT8 rear fogs
 
Had a long conversation with Clint at The Electrical Depot about the connector for these fogs... Here's what we came up with:

Here are the part numbers to build the connectors you need for the lights:

12052641 Bag of 5 3.85 2 Way Metri-Pack Female Connector


12048086 Bag of 25 1.81 Cable Seals..... required


12048074 Bag of 25 3.21 18-16 Female Terminals

You'll also need the crimping tool, to make a good connection and allow the terminals to fit properly into the housing:



HT-11 1 @ $33.18 Crimp tool for termianl and cable seal

This is to make a complete connector as shown in post #7, which has been confirmed to fit, properly.

Parts can be found at:

theelectricaldepot.com

Hope this helps, guys!

Bob

http://i1180.photobucket.com/albums/...111710C295.jpg


CPT2010 02-27-2013 03:22 PM

Re: Part # for Female Plug - SRT8 rear fogs
 
What type of bulb fits in the rear fogs?
Mine didnt come with any and need to pick some up.

Thanks


All times are GMT -5. The time now is 08:17 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community