Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Performance Modifications (http://www.jeepgarage.org/f6/)
-   -   Socket size for srt/commander rear sway bar. (http://www.jeepgarage.org/f6/socket-size-for-srt-commander-rear-sway-bar-5420.html)

TimmyB 01-08-2010 08:03 PM

Socket size for srt/commander rear sway bar.
 
Dont ask, but I need the socket sizes for the bushing bracket bolts and for the nut and bolts on the links of the rear srt/commander sway bar. Thanks.

Scottina06 01-08-2010 08:05 PM

Re: Socket size for srt/commander rear sway bar.
 
its in the wk suspension thread I believe

TimmyB 01-08-2010 08:17 PM

Re: Socket size for srt/commander rear sway bar.
 
Nope, dont see it. But it should be the same size as everything on the WK right?

Chris 01-08-2010 08:20 PM

Re: Socket size for srt/commander rear sway bar.
 
Wouldn't they be the same size as what's on all the stock stuff right now? I don't know for sure since I haven't ordered my stuff yet, but one would think!

Joe in PA 01-08-2010 08:24 PM

Re: Socket size for srt/commander rear sway bar.
 
When I replaced my WK Limited bar with the SRT8 bar, bushings and brackets I re-used the same bolts for the brackets and the tie rod end & nuts at he link. If I recall correctly it was two different metric sizes. Some combination of 18, 16 and 14 I think?

TimmyB 01-08-2010 08:38 PM

Re: Socket size for srt/commander rear sway bar.
 
^^^ Awesome, thanks

DJ BoNiOmArIo 01-08-2010 08:45 PM

Re: Socket size for srt/commander rear sway bar.
 
how fast can you run with the tool kit lol ?

TimmyB 01-08-2010 08:52 PM

Re: Socket size for srt/commander rear sway bar.
 
Haha, I didnt want to bring a whole tool kit, thats why im asking just what sockets I need.

TimmyB 01-08-2010 08:53 PM

Re: Socket size for srt/commander rear sway bar.
 
I will update on my progress with things. Wink.

DJ BoNiOmArIo 01-08-2010 08:55 PM

Re: Socket size for srt/commander rear sway bar.
 
LMAO ur too funny bro ... good luck if you dont post I'll know where to look for u

Scottina06 01-08-2010 08:55 PM

Re: Socket size for srt/commander rear sway bar.
 
sorry...it was the tq specs and not nut size

Joe in PA 01-08-2010 09:05 PM

Re: Socket size for srt/commander rear sway bar.
 
Funny you should mention torque specs Scott as you know I am a stickler for such things. Even so, there's no way I could torque the nuts on the links. Tightening that nut required using a box end wrench on the nut and a real small socket on the threaded end of the tie rod end. Just no way to use a torque wrench and do it, at least not with the sockets I own.


All times are GMT -5. The time now is 05:58 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community