Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Wrangler-YJ, TJ & JK (
-   -   Bumper~lights... (

DuckGal20g 03-14-2013 04:36 PM

I am replacing my stock bumper with a JK rock crawler w/winch plate bumper and there are no or what do I do to keep my fog lights?

mattie_b 03-15-2013 08:24 AM

Re: Bumper~lights...
Your options are, from most difficult to easiest:

Take your fog lights out of stock bumper, trace and cut holes in new bumper, install and secure lights.

Buy new lights that will connect to the pre-existing wiring and mount them to the new bumper by drilling some holes in it and securing them.

Buy new lights that will connect to the pre-existing wiring and mount them in holes that are already on the bumper.

Remove the lights from the wiring, zip-tie the wires underneath the hood where they are out of the way.

It really depends on what you want to do. It's a JK, there is no right or wrong answer.

DuckGal20g 03-15-2013 08:35 AM

Re: Bumper~lights...
Any suggestions on what type of lights are the best and easiest to mount on the bumper?

mattie_b 03-16-2013 06:17 AM

Which bumper did you get? Does it have predrilled holes in it? If so, any lights will be pretty easy to install. If you look at most sites like quadratech or 4wheelparts, their selections usually have lights that have pre-existing harnesses that plug right up to your existing connections. Just depends on what you want to spend.

jp07blkE85 03-22-2013 11:51 AM

Re: Bumper~lights...
another option I saw on another forum: replace the headlights with 7" headlights that include the blinkers ( I think they were old chevy restoration H4 7" for hotrods), replace the blinkers with fog lights (aftermarket).

All times are GMT -5. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community