Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Troubleshooting/Problems Discussion (http://www.jeepgarage.org/f77/)
-   -   Front Drive shaft GC 07 quadra drive (http://www.jeepgarage.org/f77/front-drive-shaft-gc-07-quadra-drive-56646.html)

Arabex 03-17-2013 01:16 AM

Front Drive shaft GC 07 quadra drive
 
Hi guys!


Need your advise, I need to replace my Jeep's front drive shaft (p/n 52853431AA) my jeep is currently at the dealer looks like that drive shaft is not available anywhere around the USA (I know sounds crazy) that part is on back order, I googled that part number and there's a lot of websites that claims they have that drive shaft, however I don't know them and I was expecting that maybe some of you can help me with some recommendations on what to do about it.

By the way, dealer is asking 670$ for the part including labor for a brand new drive shaft and 500$ for a used one.

What do you think?

Thanking you guys in advance for your prompt replies!

kennzz05 03-17-2013 03:38 AM

Re: Front Drive shaft GC 07 quadra drive
 
dont know if this will help but try this link, in post #24 there is mention of a company called rockford that may or may not offer parts to convert yours to ujoints or they sell the cv type joints you need it was getting confusing reading all the thread posts so im not really sure, but good luck. i guess its certainly worth calling them. post the outcome if you dont mind. heres the link
CV to U-joint style drive shaft - Page 2 - JeepForum.com
and the link to rockford
http://www.rockforddriveline.com/default.htm

kook11 04-17-2013 06:23 PM

If it is only the prop shaft you can easily do it yourself. I believe there are only 8-12, bolts, a wobble socket will be needed. You will have to toggle back and forth from park to neutral if you have jeep off the ground while taking off and on. Once u take bolts out put lock tight on threads before u put back in. It shouldn't take longer than half hr. I believe Dana was the manufacturer of the prop shafts. Check with them.

stashgto 04-17-2013 07:49 PM

Re: Front Drive shaft GC 07 quadra drive
 
Here's a link below to a thread with a few options

Poll: I Found a Shop That Can Replace WK U-Joints… ( 1 2 3 ... Last Page)
lll2for3lll


All times are GMT -5. The time now is 09:47 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community