Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Interior/Exterior/Visual/Lighting (
-   -   Weston Light Bar installation issues (

witmde2011 03-26-2013 07:31 PM

Weston Light Bar installation issues
Yo Jeepers

I got a weston light bar to improve my wj's badassness. when i started installation, first, when i took the sway bar cover off, the plastic "push pins" snapped off instead of pulling out. the problem was solved after some hammering. but then when we tried bolting the supports in, the bolts didnt seem to be the right size/thread diameter. im just wondering if anyone who has the light bar or any light/bull/brush guard for that matter, have had trouble using the bolts that were sent to you.


Gus9890 03-27-2013 01:23 PM

Re: Weston Light Bar installation issues
Sometimes they work, sometimes they don't. If they don't work, just modify a lil bit to something that works.

northstarUSMC 06-13-2013 10:54 PM

Re: Weston Light Bar installation issues
I just reuse the factory bolts... take them and clean them up, and they are as good as new.

witmde2011 06-13-2013 11:06 PM

Re: Weston Light Bar installation issues
I got it installed. Just went to the hardware store and got different bolts. the ones Westin sent were just a hair too big

All times are GMT -5. The time now is 01:29 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community