Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Interior/Exterior/Visual (http://www.jeepgarage.org/f176/)
-   -   LED lights (http://www.jeepgarage.org/f176/led-lights-57833.html)

12altitude 04-05-2013 01:24 PM

LED lights
 
1 Attachment(s)
I purchased these at my local aftermarket shop!for my license plate lights) Anyone know if these fit!?...for one there's no way in hell my fingers fit in that small ass space to take the stock ones out and two I tried a needle nose and I feel like I'm bout to break the bulb! It's a 12' altitude.....if the pic don't work the lights are united led light bulbs 12v dc

Attachment 21978

joyfil2001 04-05-2013 02:47 PM

Re: LED lights
 
Yes these will work

12altitude 04-05-2013 03:33 PM

Quote:

Originally Posted by joyfil2001 (Post 796658)
Yes these will work

Ok thanks!...question now how the hell do I get the stock ones out lol

joyfil2001 04-05-2013 04:08 PM

Re: LED lights
 
I used a flathead screwdriver to kind of force them out. I didn't car if they broke(they didn't).

12altitude 04-17-2013 03:04 PM

After spending about an hour I said fck it...I'll wind up scratching or putting the screw driver thru the door

joyfil2001 04-17-2013 03:13 PM

Try a pair of needle nose pliers. You will get them out. The glass is pretty tough and you won't break it if you use apply a little pressure.

joyfil2001 04-19-2013 10:30 AM

Re: LED lights
 
Did you get them out yet?

12altitude 04-19-2013 12:15 PM

Nah,I haven't tried again yet

DirtyDuc83 04-19-2013 06:00 PM

Re: LED lights
 
I used needle nose pliers when I changed mine. Took all of 3 minutes total to remove and replace with LED bulbs. I was pretty surprised at the strength of the original bulbs...I squeezed on em pretty good when removing them.

12altitude 04-24-2013 01:52 PM

Quote:

Originally Posted by DirtyDuc83 (Post 807530)
I used needle nose pliers when I changed mine. Took all of 3 minutes total to remove and replace with LED bulbs. I was pretty surprised at the strength of the original bulbs...I squeezed on em pretty good when removing them.

Ight call me dumb as I'm gonna attempt to so it again I only pull the bulb out? Not the housing that its in? 😂

12altitude 04-24-2013 02:04 PM

Just tried it...got the bulb out but the led does not fit

azzolij 04-24-2013 06:07 PM

Re: LED lights
 
You need a T-type led like the PUTCO 280003W for the license plate lamp on a
2011 to 2013 Grand Cherokee.


All times are GMT -5. The time now is 11:41 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community