Stock 8.6 sec and with diablo 93 7.9 seconds... three weeks from now i'll have an enhanced tune with CAI and Gibson exhaust and a catch can installed. I'll see if that makes a big difference.
Stock 8.6 sec and with diablo 93 7.9 seconds... three weeks from now i'll have an enhanced tune with CAI and Gibson exhaust and a catch can installed. I'll see if that makes a big difference.
He's in literally the worst place in the world. High altitude, comes above freezing a few days a year, heck he probably had to do that 0-60 run on ice.
That's closer to what I'm seeing. I'm still playing with traction control on/off and some of the other features...but I think I can get somewhere around 6.5ish
Actually I did have the seat belt on. I never drive without it. There was a problem with the sensor which seemed to be a manufacturer defect. I took the car to our dealer here which then the problem was solved.
Attached are three pictures where I tested yesterday through iOBD2 software from iPad. For the 7.837s, during that the temperature was 38C (100.4F). I have only one mod and that's Mopar Intake (installed very recently), and nothing else.
The other two were runs @ 35C (95F).
During winter here when the temperature was below 20C, I used to get slightly below 7s (around 6.9 something) and that was without the Mopar Intake. I will test it with Mopar intake during next winter when temperatures drop below 20C. I should be making less than 6.9. I remmember last year during summer without the Mopar Intake at the same temperatures I would make around 8.1-8.2s. So it looks like the intake is doing some work.
The heat here really kills an engine's performance.
AFE intake, dynomax cat back, Diablo Trinity 93 tune
22x10 rear wheels with 305/40 tires (1" larger than stock)
Air temp 85F and I forgot to turn the A/C off
It surprised me that it will now actually spin these big wheels and tires with the traction control off.
I just purchase the Diablo Trinity from amazon and will use it once it arrives. But I will tune on 91 octane since we only got here 92 octane fuel. I will post stock and tuned results.
Just curious, I have a "70th Anniversary" Laredo 4x4 w/ Hemi. The build sheet shows I have a 3.45 Rear Axle Ratio. Is that the standard "stock" ratio? I ask, because that 3.45 is listed under the "optional" part of my window sticker. I don't see an axle ratio listed under the "standard equipment" part. That could affect the 0-60 times no doubt.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Jeep Garage - Jeep Forum
1.7M posts
176.2K members
Since 2009
Jeep Garage is where you can talk about all your favorite jeeps including the Cherokee, Liberty and Grand Cherokee.