Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (
-   Grand Cherokee SRT - WK2 (
-   -   BT Catch can w/ 2 brass Fittings? (

Anonymoustache 06-23-2013 11:21 AM

BT Catch can w/ 2 brass Fittings?
Was I supposed to receive two brass fitting with my catch can, or am I missing something on this install? I only received 1.

SRT8BLK 06-23-2013 11:59 AM

Re: BT Catch can w/ 2 brass Fittings?
you are only supposed to receive 1, it goes into the connection closure to front of engine. you need to remove rubber connection near back of engine to install tubing. by the way, can't believe how much oil is in catch can after only 1000 miles, emptied mine today for first time.

Anonymoustache 06-23-2013 12:25 PM

Re: BT Catch can w/ 2 brass Fittings?
Thank you. I received instructions on the 2011-2012 5.7 so they were of no use. Everything is as it should be.

I'm at 1100 miles as of the install today so it sounds like I missed out on some catch can time that I may have needed. It took forever to get a polished one.

Red Suns 06-23-2013 04:36 PM

Re: BT Catch can w/ 2 brass Fittings?
I had issues trying to remove that rubber hose connector from the upper manifold and I didn't feel like monkeying with it, so I went ahead and picked up another brass "inline airline splice" fitting from Napa Auto Parts (store) part #90-558. (upc code 51001 – 05580) per JDR8's blog.

Catch can installed

All times are GMT -5. The time now is 05:22 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community