Jeep Garage  - Jeep Forum

Jeep Garage - Jeep Forum (http://www.jeepgarage.org/forums.php)
-   Suspension/Driveline/Brakes (http://www.jeepgarage.org/f172/)
-   -   Crossed Drilled And Slotted Rotors (http://www.jeepgarage.org/f172/crossed-drilled-and-slotted-rotors-62063.html)

bigcity123 06-27-2013 08:19 PM

Crossed Drilled And Slotted Rotors
 
I Received my New R1 rotors today !
can't wait to install with lowering springs

bigcity123 06-27-2013 08:20 PM

Re: Crossed Drilled And Slotted Rotors
 
Will Update With Photos

Scottina06 06-27-2013 09:27 PM

Re: Crossed Drilled And Slotted Rotors
 
cool

EviL 07-24-2013 05:45 AM

Re: Crossed Drilled And Slotted Rotors
 
Quote:

Originally Posted by bigcity123 (Post 849429)
I Received my New R1 rotors today !
can't wait to install with lowering springs

are the R1 concept drilled and crossed rotors products shown in the website
cuz ive been there and nothing is for the SRT8 model of 2012.

r the WK1's the same size as the WK2?!

i dont think so..

assistance required.

barish93 07-24-2013 04:44 PM

For some reason I couldn't find them on the website also. Just call them, that what I did.

14StormTrooper 08-29-2013 04:34 PM

Re: Crossed Drilled And Slotted Rotors
 
Quote:

Originally Posted by bigcity123 (Post 849429)
I Received my New R1 rotors today !
can't wait to install with lowering springs

how much did you pay?

Scottina06 08-29-2013 04:51 PM

Re: Crossed Drilled And Slotted Rotors
 
those are just drilled centric brand rotors. Centric rotors are very cheap...but a good rotor. R1 drills the rotors themselves which could lead to cracking....FYI. They've sold probably hundreds of sets for SRT's though. I had a set on my 2006.

Fght On 11-08-2013 02:54 PM

Re: Crossed Drilled And Slotted Rotors
 
I have the R1 drilled and slotted rotors - have had them for about 2 months and all the recessed areas (around the drill holes and slots) and inner ring around the hub (any area the pad doesn't touch is covered in surface rust. I'm not very happy and when I mount my new 22's it's going to look horrible. I called R1 and they said to remove and spray the entire rotor in a high temp black and then once the pad contact area will wear off and the rest will remain black. Don't like this at all - for almost $700 worth of rotors this shouldn't be the case. I would not recommend R1concepts!

Think I'm about to go with the drilled brembo's if no one has this surface rust issue.

Scottina06 11-09-2013 04:45 AM

Re: Crossed Drilled And Slotted Rotors
 
I have 0 rust on my brembos

Fght On 11-09-2013 04:44 PM

Re: Crossed Drilled And Slotted Rotors
 
Thanks Scott - think I'm going to bite the bullet and dump more $$ into this thing. After all, what's another grand!! :(

Scottina06 11-10-2013 12:58 AM

Re: Crossed Drilled And Slotted Rotors
 
nope...little over $600 now on tirerack.com for brembos

mzimand 11-10-2013 01:20 AM

Quote:

Originally Posted by Scottina06 (Post 927522)
nope...little over $600 now on tirerack.com for brembos

For brembo cross drilled?
I just checked and they were $815

Sent from my VS980 4G using Tapatalk 2


All times are GMT -5. The time now is 08:01 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2012 - JeepGarage.Org
The Jeep Grand Cherokee Owners Community